No crank 2009 Chevy Cobalt 2.2L new timing chain

Question

Yes my cobalt won't crank I've put timing chain on fuel pump throttle body crank and camshaft sensors still no crank

Answer 1

Did the issue begin following the installation of the timing chain? If so, it's highly probable that the timing chain wasn't installed correctly, resulting in the timing being off.

Comments

No it was before I put timing chain on I also put fuel pump starter it will crank if I jump the relay but no start I'm getting spark from the coils I did a fuel pressure test it was between 45 and 50 also did compression test two of the cycliners 190 and two at 200 I've cleaned injectors but not getting fuel out of them I'm getting to the rail just got me puzzled pls help

---

I apologize for the response, if there was a problem with the timing chain, the engine will crank but not start. In your case, the engine is not cranking at all.
You may have a problem with the Theft Deterrent system or the Theft Deterrent Module (TDM). Please start by checking the Theft System fuse (Check all the fuses if possible) in the Body Control Module. Also, try starting the engine with a different key.