The camshaft position sensor consists of a magnet, an iron core, and a pick-up coil. This sensor
The engine coolant temperature sensor is used to detect the engine coolant temperature.
The Engine Control Module (ECM) detects engine RPM with the crankshaft position sensor.
The Evaporative Emission System (EVΑP) is used to reduce the hydrocarbons emitted into the atmosphere by the fuel system.
The Exhaust Gas Recirculation (EGR) system is designed to reduce oxides of nitrogen (NOx) emissions by lowering combustion temperatures.
The Intake Air Temperature (IAT) sensor is built into the Mass Air Flow (MAF) sensor or in some vehicles mounted to the air filter duct housing.
A knocking vibration from the cylinder block is sensed as vibrational pressure by the Knock Sensor.
The Manifold Absolute Pressure (MAP) sensor generates a signal that is proportional to the amount of vacuum in the intake manifold.
The Mass Air Flow (MAF) sensor is placed in the stream of the intake air. It converts the amount of air drawn into the engine ....
The oxygen sensor sometimes referred to as heated oxygen sensor, HO2S, or O2S. It is made of zirconia, platinum electrodes, and a heater.
The Positive Crankcase Ventilation (PCV) system provides effective evacuation of crankcase vapors.
The internal combustion engine cooling thermostat maintains the temperature of the engine near....
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement.
Vehicle Speed Sensors come in several different designs depending on the manufacturer.