2013 Nissan murano

Question

We are trying to figure out why it won’t start it cranks but won’t start. So we hooked up the code reader to it and it’s telling us the it’s a cam and ckp sensors we replaced the ckp sensor and it still won’t start what are some other suggestions as to what we could do to get it fixed

Answer 1

HI there

First that code is specifically for the crank sensor. If the crank sensor you used isn't helping, I would try a dealer sensor on it. If you still get the same code, then you need to check the wiring to the sensor. You should have one power, one ground and the signal wire. You will have to do a continuity check on the signal wire to make sure it's good from the sensor to the computer. If it's not, then that could be the issue. You could also have an issue with the mechanical timing as well.