2008 hyundai accent camshaft sensor issue

Question

Hi this code p0342 for camshaft sensor keeps popping up and sensor is good but leads or harness don't match. Negative ohms are good at 2500 and positive is 12.5 volts but signal is 11.7 volts. Is this enough to cause this irritating no start issue in this car because I've gone over everything and am just about to send it to the crusher with 130kkm?

Answer 1

HI there

I would take a look at the timing belt. If the timing is off it will pop the cam sensor code and the car won't start. Also, if the connector on the new sensor is wrong, try a different sensor.