Hyundai Elantra 2010 no OBDII communication.

Question

Checked following OBDII pins:
1- Pin 4 to 16, battery supply 13.5volts
2- pin 5 to 16, battery supply 13.5 volts.
3- by removing battery -ve terminal, restance between pin4 and pin 5, 0.1 ohm.
4- chasis ground to pin 4, its has 0.1 ohms.
5- chasis ground to pin 5, its has 0.1 ohms.
6- Voltage at pin 5 (pin 4) to pin 6 is 2.5volts.
7- voltages at pin 5( pin 4)to pin 14 is 2.3 volts.
8-  Resistance beteen pin 6 and 14 is 60.2 ohm (CAN bus end termination restance, 120+120/2= 60 ohm).
9- ECM connector cleand with electrical wire cleaner CRC, dried with blower, wait for half an hour, install battery +ve connector.