P0753 Honda Civic 96-change the solenoid and still d4 flashes

Question

I got the codes p0700 and p0753, I urderstand that the first code is just to point me into the transmission. now with the second code I went and changed the shift solenoid and still d4 flashes. Funny thing is that the car runs fine but it wont change into overdrive, then somene told me it could be the ecm, got it checked and they told me the ecm was in perfect condition and no sign of detereoration, checked the main relay, checked the fuses, now the only option it seemes to me is a problem with the wires or the connectors. Situation am a lady learnig the basics with my honda and i dont got a clue on how to check the wires that go from the shis=ft solenoid to the ecm. I am going crazy... please help!

Answer 1

P0753 Shift control solenoid A What shift solenoid A is it is the TCC (toque convertor clutch) shift  solenoid assembly, When it fails the D4 will flash , it represent a abscence of shift solenoid A or the torque convertor lock up. There is a locking tab it should mate very snuggly check to see if any of the pis may have gotten pushout.

Comments

Thanks, I checked the wires that come from the ecm to the solenoid with a tester, but it seemes that the wires are not getting voltage. So assume that if there is no voltage in the plugs of the solenoid but I have voltage in the fuse box, so maybe theres is a shorted wire am not founding.

---

How con I know which are the correct wires to check?

---

Can you repost the question I will send more information list it  as P0753