Error code P0320 on 2000 Dodge Intrepid 2.7L, What does it mean?

Question

Car stalls while driving. Wait 10 mins starts right up

Answer 1

P0320 No crank reference signal at the PCM

P0455 Evap leak monitor large leak detected

P1389 No ASD relay output voltage at PCM

P0320 will explain why the vehicle stall while driving, this is the crank position sensor, Without this signal there is no ignition , If the ECM does not see a ignition signal fuel is not given,nor is spark, P1389 is the ASD relay this relay power the ignition coil,power the crank position sensor and the fuel injector,this can be from a failing ASD relay . Do 2 things replace the crank position sensor as they do age and wear out, And either replace the ASD relay or just it around with another relay.The crank position sensor is located on the passenger side of the transmission bell housing above the differential,If the crankposition sensor and ASD relay repair is done and the vehicle stall intermittently still.The PCM will have to be replaced and will require the VIN to be reflashed.