My 2001 Ford Windstar shows OBD codes C1185, C1194, AND C1194. what I should look for to fix this.

Question

My 2001 Ford Windstar shows OBD codes C1185, C1194, AND C1198. Any ideas on what I should look for to fix this.
Also both the brake light and the ABS Lights on dash come on. and it says CHECK TRACTION CONTROL on the dash.

Answer 1

C1185 ABS relay output circuit failure

C1194 LF Dump valve coil circuit failure

C1198 LF ISO valve coil circuit failure

 Check  for brake leak at the brake master cylinder, there is a pressure switch that has a tendency to leak brake fluid on the ABS connector, If there is no leak there and the connection are fine .What you will need to resolve this is a HCU (hydraulic control unit),

Comments

I have the c1194 on my 2003 Windstar and my reader says no dtc definitions found??????? check service manual cant find that in it anywhere. Also have brake light and ABS light on as well.

---

C1194 Left front dump valve coil circuit failure,Most scan tool on the market read "P" codes or powertrain codes, there are some on the market that will also read "C" code which are communication codes, the brake light you should trouble shoot first this can be from E- brake switch stuck on to a brake master hydraulic switch or the master cylinder level switch,