P2544 Code - Torque Management Request Input Signal 'A'
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2544 indicates Torque Management Request Input Signal 'A'.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2544 Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2544?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2544?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2544 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2544 code?
Need more information on how to fix the P2544 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2544 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2544 Buick — Torque Management Request Input Signal 'A'
- P2544 Cadillac — Torque Management Request Input Signal 'A'
- P2544 Chevrolet — Torque Management Request Input Signal 'A'
- P2544 Dodge — Torque Management Request Input Signal 'A'
- P2544 Ford — Torque Management Request Input Signal 'A'
- P2544 GMC — Torque Management Request Input Signal 'A'
- P2544 Lincoln — Torque Management Request Input Signal 'A'
- P2544 Mercury — Torque Management Request Input Signal 'A'
- P2544 Pontiac — Torque Management Request Input Signal 'A'
Frequently Asked Questions about P2544 Code
1. What does OBDII code P2544 mean?
P2544 indicates an issue with the Torque Management Request Input Signal 'A,' which typically relates to communication between the engine control module (ECM) and transmission control module (TCM).
2. What are the common symptoms of code P2544?
Symptoms may include reduced engine performance, transmission shifting issues, activation of limp mode, and the Check Engine Light being illuminated.
3. What causes the P2544 code to appear?
Common causes include a faulty torque management request sensor, damaged wiring or connectors, issues with the ECM or TCM, or software glitches in the control modules.
4. Can driving with a P2544 code damage my vehicle?
Driving with this code can lead to poor performance and may cause further damage to the engine or transmission if not addressed promptly.
5. How do I diagnose the P2544 code?
Diagnosis involves scanning for related trouble codes, inspecting the torque management request sensor, checking wiring and connectors, and testing the ECM and TCM for proper communication.
6. How can I fix the P2544 code?
Repairs may include replacing a faulty torque management request sensor, repairing damaged wiring or connectors, reprogramming or updating the ECM/TCM software, or replacing defective control modules.
7. How much does it cost to fix the P2544 code?
Repair costs vary but generally range from $100 to $500, depending on whether sensor replacement, wiring repairs, or control module reprogramming is needed.
8. Can a dead battery trigger the P2544 code?
A low or dead battery can sometimes cause communication errors between modules, potentially leading to this code. Check the battery and charging system as part of the diagnosis.
9. Is a software update required to resolve the P2544 code?
In some cases, manufacturers may release software updates for the ECM or TCM to resolve communication issues related to this code.
10. What tools are needed to troubleshoot the P2544 code?
You’ll need an OBDII scanner, a multimeter for testing wiring, and possibly access to manufacturer-specific diagnostic procedures or software for module testing.
Discuss the causes and fixes for P2544 OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
