P2544 Buick Code - Torque Management Request Input Signal 'A'
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2544 Buick indicates Torque Management Request Input Signal 'A'.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2544 Buick Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2544 Buick?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2544 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2544 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2544 Buick code?
Need more information on how to fix the P2544 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2544 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2544 Buick Code
1. What are the common symptoms of OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- Common symptoms include poor engine performance, reduced power, and potential stalling or hesitation during acceleration.
2. What are the possible causes of OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- Possible causes may include a faulty torque management request switch, wiring issues, a malfunctioning powertrain control module (PCM), or a defective transmission control module (TCM).
3. How can I diagnose OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- Diagnosis typically involves using a scan tool to read the trouble code, inspecting the wiring and connectors for damage, and testing the torque management request switch for proper function.
4. Can I continue driving my Buick with OBDII code P2544 related to Torque Management Request Input Signal 'A' present?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the engine or transmission if left unresolved.
5. How can I repair OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- Repair options may include replacing the torque management request switch, repairing any damaged wiring, or reprogramming the PCM or TCM as needed.
6. Will resetting the trouble codes clear OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- Resetting the trouble codes may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.
7. Can a DIY enthusiast fix OBDII code P2544 related to Torque Management Request Input Signal 'A' in a Buick?
- Depending on the root cause of the issue, some DIY enthusiasts with the necessary tools and skills may be able to fix this code. However, complex electrical or transmission-related issues may require professional diagnosis and repair.
8. Is OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A' a common problem?
- While not as common as some other OBDII codes, P2544 can occur in Buick vehicles experiencing issues with the torque management system.
9. Can extreme weather conditions cause OBDII code P2544 related to Torque Management Request Input Signal 'A' in a Buick?
- Extreme weather conditions can potentially cause wiring issues or sensor malfunctions that may trigger this trouble code.
10. Is it necessary to visit a dealership for repairs related to OBDII code P2544 in a Buick related to Torque Management Request Input Signal 'A'?
- While a dealership may have specialized knowledge and tools for Buick vehicles, independent repair shops or skilled mechanics can also effectively diagnose and repair this code.
Discuss the causes and fixes for P2544 Buick OBDII Code
Code P2544 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
