P2163 Code - Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2163 indicates Throttle/Pedal Position Sensor 'A' Maximum Stop Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2163 Description
What are the Possible Causes of the DTC P2163?
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2163?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2163 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2163 code?
Need more information on how to fix the P2163 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2163 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2163 Dodge — Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
- P2163 Ford — Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
- P2163 Lincoln — Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
- P2163 Mercury — Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
Frequently Asked Questions about P2163 Code
1. What are the common symptoms of OBDII code P2163?
The common symptoms of OBDII code P2163 include poor acceleration, reduced engine power, stalling, and the vehicle going into "limp mode."
2. What can cause OBDII code P2163 to trigger?
OBDII code P2163 is typically triggered by a faulty throttle or pedal position sensor, wiring issues, or a problem with the electronic throttle control system.
3. How can I diagnose the cause of OBDII code P2163?
To diagnose the cause of OBDII code P2163, you can use a diagnostic scan tool to read the code and inspect the throttle position sensor, pedal position sensor, wiring, and connections for any visible damage.
4. Can I drive my vehicle with OBDII code P2163 present?
It is not recommended to drive your vehicle with OBDII code P2163 present, as it can lead to further damage and unsafe driving conditions due to potential loss of engine power.
5. How can I repair OBDII code P2163?
To repair OBDII code P2163, you may need to replace the faulty throttle or pedal position sensor, repair any damaged wiring or connections, and clear the code using a diagnostic scan tool.
6. Are there any DIY tips for fixing OBDII code P2163?
DIY tips for fixing OBDII code P2163 include checking the sensor connections for corrosion, ensuring proper sensor alignment, and following the manufacturer's repair procedures outlined in the service manual.
7. Can a dirty throttle body cause OBDII code P2163?
A dirty throttle body can sometimes cause issues with throttle position sensor readings, which may indirectly lead to OBDII code P2163. It is recommended to clean the throttle body as part of the diagnostic process.
8. How much does it cost to repair OBDII code P2163 at a mechanic?
The cost to repair OBDII code P2163 at a mechanic can vary depending on the cause of the issue, the labor rates, and the cost of parts. It is advisable to get a few quotes from different mechanics for an accurate estimate.
9. Can resetting the ECU clear OBDII code P2163?
Resetting the Engine Control Unit (ECU) may temporarily clear OBDII code P2163, but the issue will likely return if the underlying problem with the throttle or pedal position sensor is not addressed.
10. Is OBDII code P2163 a common issue in specific vehicle makes and models?
OBDII code P2163 can be a common issue in various vehicle makes and models, especially those equipped with electronic throttle control systems. It is always recommended to check for technical service bulletins specific to your vehicle.
Discuss the causes and fixes for P2163 OBDII Code
Code P2163 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
