P2163 Dodge Code - Throttle/Pedal Position Sensor 'A' Maximum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2163 Dodge indicates Throttle/Pedal Position Sensor 'A' Maximum Stop Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2163 Dodge Description
What are the Possible Causes of the DTC P2163 Dodge?
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2163 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2163 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2163 Dodge code?
Need more information on how to fix the P2163 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2163 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2163 Dodge Code
What does the OBDII code P2163 mean on a Dodge vehicle?
The P2163 code indicates an issue with the Throttle/Pedal Position Sensor 'A' Maximum Stop Performance, meaning the sensor's signal is outside the expected range.
What are the common symptoms of the P2163 code?
Symptoms include poor throttle response, reduced engine power, hesitation when accelerating, and the illumination of the check engine light.
What causes the P2163 code to appear?
Common causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning accelerator pedal position sensor, or a problem with the engine control module (ECM).
Can I drive my Dodge with the P2163 code?
It’s not recommended, as the throttle response issues could lead to unsafe driving conditions or further damage to the vehicle's systems.
How do I diagnose the P2163 code?
Start by scanning the vehicle with an OBDII scanner, inspecting the throttle and pedal position sensors, and checking the wiring and connectors for damage or corrosion.
How can I fix the P2163 code on my Dodge?
Repairs may include replacing the throttle position sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the ECM if necessary.
Is the P2163 code specific to Dodge vehicles?
No, the P2163 code is a generic OBDII code, but the troubleshooting steps and symptoms may vary slightly between vehicle manufacturers.
How much does it cost to fix the P2163 code?
The repair cost depends on the root cause, ranging from $100 for a simple sensor replacement to $500 or more for ECM repairs or replacements.
Can a dirty throttle body cause the P2163 code?
Yes, a dirty or malfunctioning throttle body can cause improper sensor readings, potentially triggering the P2163 code.
Will resetting the check engine light fix the P2163 code?
Resetting the light may temporarily clear the code, but the underlying issue must be addressed to prevent it from returning.
Discuss the causes and fixes for P2163 Dodge OBDII Code
Code P2163 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
