AutoCodes – Generic – P1763

P1763 Code - Governor Pressure Sensor Too High Conditions

Quick Answer

With the engine running, system voltage over 10v, vehicle runtime over 2 seconds, Transmission Sump Temperature input from 207-268°F, the Powertrain Control Module (PCM) detects that the Transmission Sump Temperature (TST) input was more than 4.89v for 8.36 seconds. Common causes include Faulty Governor Pressure Sensor, Governor Pressure Sensor harness is open or shorted, Governor Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1763 indicates Governor Pressure Sensor Too High Conditions.
Common causes: Common causes include Faulty Governor Pressure Sensor, Governor Pressure Sensor harness is open or shorted, Governor Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,089

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1763 Description

OBDII Code P1763 - Governor Pressure Sensor Too High Conditions - AutoCodes.com — P1763 Code - Governor Pressure Sensor Too High Conditions

What does this mean?

What are the Possible Causes of the DTC P1763?

Faulty Governor Pressure Sensor
Governor Pressure Sensor harness is open or shorted
Governor Pressure Sensor circuit poor electrical connection

How to Fix the DTC P1763?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1763 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1763 code?

Need more information on how to fix the P1763 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1763 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1763 Chrysler — Governor Pressure Sensor Too High Conditions
P1763 Dodge — Governor Pressure Sensor Too High Conditions
P1763 Hyundai — Control Module ROM
P1763 Jeep — Governor Pressure Sensor Too High Conditions

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1763 Code

1. What are the common symptoms of OBDII code P1763 (Governor Pressure Sensor Too High Conditions)?

The common symptoms include harsh shifting, transmission slipping, transmission overheating, and the transmission going into limp mode.

2. What are the possible causes of OBDII code P1763?

The code P1763 can be caused by a faulty governor pressure sensor, issues with the transmission fluid level or condition, a malfunctioning transmission solenoid, or a problem with the transmission control module.

3. How can I diagnose the OBDII code P1763?

Diagnosing the code involves using a scan tool to read the fault codes and performing a thorough inspection of the governor pressure sensor, wiring, and related components in the transmission system.

4. What are some repair tips for fixing OBDII code P1763?

Repair tips include replacing the governor pressure sensor, checking and topping up the transmission fluid, inspecting and repairing any damaged wiring, and ensuring proper connection of all transmission components.

5. Can driving with OBDII code P1763 cause further damage to the vehicle?

Continuing to drive with the code P1763 may lead to further damage to the transmission system, resulting in more extensive and costly repairs. It is recommended to address the issue promptly.

6. Is it safe to clear the OBDII code P1763 without fixing the underlying issue?

Clearing the code without addressing the root cause may temporarily eliminate the warning light, but the underlying problem will persist, potentially leading to more severe transmission issues in the future.

7. How much does it typically cost to repair OBDII code P1763?

The cost of repairing the code P1763 can vary depending on the exact cause of the issue, the labor rates in your area, and whether you choose to do the repairs yourself or take the vehicle to a professional mechanic.

8. Can OBDII code P1763 be triggered by a simple sensor malfunction?

Yes, a common cause of the code P1763 is a malfunctioning governor pressure sensor, which can often be replaced relatively easily to resolve the issue.

9. What should I do if I encounter OBDII code P1763 intermittently?

If the code appears intermittently, it is still important to address the underlying issue promptly to prevent potential transmission damage. A thorough diagnosis is recommended to identify the root cause.

10. Is it possible to prevent OBDII code P1763 from occurring in the future?

Regular maintenance of the transmission system, including checking and changing the transmission fluid at recommended intervals, can help prevent issues like code P1763 from occurring.