AutoCodesFord – P1443 Ford

P1443 Ford Code - Evaporative Emission System Control Valve Low/No Flow

Quick Answer

The Powertrain Control Module (PCM) monitors the fuel tank pressure. Common causes include Loose fuel filler cap, Faulty EVAP Canister Purge Solenoid Valve, EVAP Canister Purge Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1443 Ford indicates Evaporative Emission System Control Valve Low/No Flow.
Common causes
Common causes include Loose fuel filler cap, Faulty EVAP Canister Purge Solenoid Valve, EVAP Canister Purge Solenoid Valve harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 124,671
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jul 06, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1443 Ford Description

The Powertrain Control Module (PCM) monitors the fuel tank pressure. The Diagnostic Trouble Code (DTC) will set when the PCM detects a fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge, fuel vapor, flow at less than 0.02 lb/min (0.15 gm/s).
OBDII Code P1443 Ford - Evaporative Emission System Control Valve Low/No Flow - AutoCodes.com
P1443 Ford Code - Evaporative Emission System Control Valve Low/No Flow

What are the Possible Causes of the DTC P1443 Ford?

  • Loose fuel filler cap
  • Faulty EVAP Canister Purge Solenoid Valve
  • EVAP Canister Purge Solenoid Valve harness is open or shorted
  • EVAP Canister Purge Solenoid Valve circuit poor electrical connection
  • Blocked hose between the purge valve and FTP sensor
  • Faulty EVAP Fuel Tank Pressure (FTP) Sensor

How to Fix the DTC P1443 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1443 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1443 Ford code?

Need more information on how to fix the P1443 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1443 Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1443 Ford Code

1. What are common symptoms of OBDII code P1443 in a Ford vehicle?

- Common symptoms include the check engine light turning on, rough idling, decreased fuel economy, and potential difficulties during the vehicle's emission test.

2. What typically causes the OBDII code P1443 in a Ford vehicle?

- The most common cause of P1443 is a malfunction in the evaporative emission system control valve, which can lead to low or no flow of vapors from the fuel tank to the engine.

3. How can I diagnose the issue related to code P1443 in my Ford vehicle?

- To diagnose the problem, you may need to inspect the evaporative emission system components, check for leaks in the system, test the control valve operation, and verify the vacuum lines for proper functioning.

4. Can a faulty gas cap trigger the OBDII code P1443 in a Ford vehicle?

- Yes, a loose, damaged, or missing gas cap can cause evaporative emission system issues, potentially leading to the triggering of code P1443.

5. What are some repair tips for fixing the OBDII code P1443 in a Ford vehicle?

- Repair tips include checking and replacing the control valve, inspecting and repairing any leaks in the evaporative emission system, ensuring the gas cap is secure, and clearing the trouble code to see if the issue persists.

6. Is it safe to continue driving with the OBDII code P1443 illuminated in my Ford vehicle?

- While driving with code P1443 is generally safe in the short term, it is recommended to address the issue promptly to prevent potential damage to the vehicle's emission control system and ensure optimal performance.

7. How much does it typically cost to repair the OBDII code P1443 in a Ford vehicle?

- The cost of repairing P1443 can vary depending on the root cause of the issue, but it may range from $100 to $500, including parts and labor.

8. Can I reset the OBDII code P1443 in my Ford vehicle without fixing the underlying problem?

- While you can clear the trouble code using an OBDII scanner, it is crucial to address the root cause of the issue to prevent the check engine light from reappearing and ensure the vehicle operates efficiently.

9. Are there any DIY repairs I can attempt to fix the OBDII code P1443 in my Ford vehicle?

- Depending on your automotive knowledge and skills, DIY repairs such as checking and tightening the gas cap, inspecting hoses for leaks, and cleaning the control valve may help resolve the P1443 code.

10. How long does it take to repair the OBDII code P1443 in a Ford vehicle at a professional mechanic's shop?

- The repair time for code P1443 can vary based on the specific issue, but it typically takes around 1-2 hours for a mechanic to diagnose, repair, and clear the trouble code in a Ford vehicle.

Discuss the causes and fixes for P1443 Ford OBDII Code

  • If you have a leak any place in the evap system , will set a code for that. So check everything leak wise first. Then you can go check sensors, cuz they fail less then age on cars for rusty lines, and things going brittle ..All cars 1998 and down.

    What I did is pulled off one of the evap hoses and fitted a pump to it, pressurized it and listen to hear leaks. I found 2 leaks in 4 min. My fuel pipe filler neck was cracked from age and high heat in AZ for a year. Now living in CA. passed emissions and holds pressure.

  • Hi I have a 96 Mazda pick up v6 and show me this code p0300 and p1443

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play