AutoCodesFord – P1443 2003 Ford F150

P1443 2003 Ford F150 Code - Evaporative Emission System Control Valve Low/No Flow

Quick Answer

The Powertrain Control Module (PCM) monitors the fuel tank pressure. Common causes include Loose fuel filler cap, Faulty EVAP Canister Purge Solenoid Valve, EVAP Canister Purge Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1443 2003 Ford F150 indicates Evaporative Emission System Control Valve Low/No Flow.
Common causes
Common causes include Loose fuel filler cap, Faulty EVAP Canister Purge Solenoid Valve, EVAP Canister Purge Solenoid Valve harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,841
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 06, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1443 2003 Ford F150 Description

The Powertrain Control Module (PCM) monitors the fuel tank pressure. The Diagnostic Trouble Code (DTC) will set when the PCM detects a fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge, fuel vapor, flow at less than 0.02 lb/min (0.15 gm/s).
OBDII Code P1443 2003 Ford F150 - Evaporative Emission System Control Valve Low/No Flow - AutoCodes.com
P1443 2003 Ford F150 Code - Evaporative Emission System Control Valve Low/No Flow

What are the Possible Causes of the DTC P1443 2003 Ford F150?

  • Loose fuel filler cap
  • Faulty EVAP Canister Purge Solenoid Valve
  • EVAP Canister Purge Solenoid Valve harness is open or shorted
  • EVAP Canister Purge Solenoid Valve circuit poor electrical connection
  • Blocked hose between the purge valve and FTP sensor
  • Faulty EVAP Fuel Tank Pressure (FTP) Sensor

How to Fix the DTC P1443 2003 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1443 2003 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1443 2003 Ford F150 code?

Need more information on how to fix the P1443 2003 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1443 2003 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1443 2003 Ford F150 Code

What does the OBDII code P1443 mean on a 2003 Ford F150?

Code P1443 indicates an issue with the Evaporative Emission System Control Valve, specifically low or no flow in the system.

What are the common symptoms of code P1443 on a Ford F150?

Symptoms may include an illuminated check engine light, a slight decrease in fuel efficiency, and potential issues with passing emissions tests.

What causes code P1443 to appear on a 2003 Ford F150?

Common causes include a faulty EVAP control valve, a clogged or damaged charcoal canister, leaking or disconnected vacuum lines, or a faulty pressure sensor.

Is it safe to drive a 2003 Ford F150 with a P1443 code?

Yes, it is generally safe to drive with this code, but it should be addressed promptly to avoid potential emissions issues or further damage to the EVAP system.

How can I fix a P1443 code on my Ford F150?

Repairs may include replacing the EVAP control valve, checking and fixing vacuum leaks, inspecting the charcoal canister, or replacing the fuel tank pressure sensor.

Can a loose gas cap cause code P1443 on a Ford F150?

While a loose gas cap is a common cause of EVAP system codes, it is less likely to cause P1443 specifically. However, it’s still worth checking and tightening the gas cap first.

How do I diagnose the cause of a P1443 code?

Start by inspecting the EVAP control valve, vacuum lines, and charcoal canister for damage or blockages. You may also need to test the valve with a multimeter or vacuum pump.

How much does it cost to fix code P1443 on a 2003 Ford F150?

Repair costs can range from $100 to $300 depending on the exact issue, such as replacing the EVAP control valve or repairing vacuum lines.

Can a faulty EVAP control valve trigger code P1443?

Yes, a faulty EVAP control valve is one of the most common causes of this code.

Will clearing the code P1443 solve the problem?

Clearing the code without addressing the underlying issue will only temporarily turn off the check engine light, and the code will likely return.

Discuss the causes and fixes for P1443 2003 Ford F150 OBDII Code

Code P1443 2003 Ford F150 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play