AutoCodesToyota – P0141 Toyota

P0141 Toyota Code - Oxygen Sensor Heater Circuit Malfunction Bank 1 Sensor 2

Quick Answer

The sensing portion of the heated oxygen sensor has a zirconia element which is used to detect the oxygen concentration in the exhaust gas. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0141 Toyota indicates Oxygen Sensor Heater Circuit Malfunction Bank 1 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 76,520
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Aug 22, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0141 Toyota Description

The sensing portion of the heated oxygen sensor has a zirconia element which is used to detect the oxygen concentration in the exhaust gas. If the zirconia element is at the appropriate temperature, and the difference between the oxygen concentrations surrounding the inside and outside surfaces of the sensor is large, the zirconia element generates voltage signals. In order to increase the oxygen concentration detecting capacity of the zirconia element, the Engine Control Module (ECM) supplements the heat from the exhaust with heat from a heating element inside the sensor.
The ECM monitors the current applied to the heated oxygen sensor heater to check the heater for malfunctions.
After the accumulated heater on time exceeds 100 seconds, the ECM calculates the heater resistance using battery voltage and the current applied to the heater. If the resistance is above the threshold value, the ECM determines that there is a malfunction in the heated oxygen sensor heater and stores Diagnostic Trouble Code (DTC) P0141.
OBDII Code P0141 Toyota - Oxygen Sensor Heater Circuit Malfunction Bank 1 Sensor 2 - AutoCodes.com
P0141 Toyota Code - Oxygen Sensor Heater Circuit Malfunction Bank 1 Sensor 2

What are the Possible Causes of the DTC P0141 Toyota?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
  • Heated Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted
  • Heated Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0141 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0141 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0141 Toyota code?

Need more information on how to fix the P0141 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0141 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0141 Toyota Code

1. What are the common symptoms of OBDII code P0141 (Oxygen Sensor Heater Circuit Malfunction Bank 1 Sensor 2) in a Toyota?

- Common symptoms include poor fuel efficiency, rough idling, engine hesitation, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P0141 in a Toyota?

- The possible causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a problem with the ECM.

3. How can I diagnose the OBDII code P0141 in my Toyota?

- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and related wiring, and checking for blown fuses.

4. Can I continue driving my Toyota with OBDII code P0141?

- While it may be possible to drive with this code, it is not recommended as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.

5. How can I repair OBDII code P0141 in my Toyota?

- Repair options include replacing the oxygen sensor, repairing damaged wiring or connectors, replacing blown fuses, or resetting the ECM.

6. Is it possible to reset the Check Engine Light caused by OBDII code P0141 without fixing the issue?

- While resetting the Check Engine Light may temporarily turn it off, the underlying issue causing the code will remain unresolved and the light will likely come back on.

7. How long does it typically take to repair OBDII code P0141 in a Toyota?

- The repair time can vary depending on the exact cause of the code, but it is usually a straightforward process that can be completed in a few hours.

8. Are there any preventive maintenance tips to avoid OBDII code P0141 in a Toyota?

- Regularly inspecting and maintaining the oxygen sensors, as well as ensuring proper wiring connections, can help prevent issues that may trigger this code.

9. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P0141 in a Toyota?

- Yes, replacing the oxygen sensor or checking wiring connections can be DIY-friendly tasks for those with basic automotive knowledge and the right tools.

10. Will OBDII code P0141 cause my Toyota to fail an emissions test?

- Yes, this code typically indicates a problem with the emissions system, which can cause a vehicle to fail an emissions test. Repairing the issue is necessary to pass the test.

Discuss the causes and fixes for P0141 Toyota OBDII Code

  • i would like to add that i was receiving codes po401 po406 and po136. I had the downstream o2 sensor replaced and it has cleared out the above noted codes. I did receive a po141 code. I cleared the code and drove the car. drove the car through the required drive cycles and the light remains off. yet again it only has been an hour, but will try to keep everyone posted as to the results.

  • i had received error P0141 and cleared it but it appear again and i dont know this sensor where is in car please help me my car corrolla 2007

  • Please check the code number again. There is no information in the 2007 Toyota Corolla factory service manual for the P0141 code.

  • Hello , in my Toyota Corolla 2002 mode engine light is one and when i checked the code it says po141 , I think it means Bank1 sensor 2 . I would like order this online, can some one help me with the part number for the product and also the exact location of the sensor in the vehicle

  • Sensor 2 is the rear sensor. Part number from the books is 89465 09200, but the part number varies from brand to brand.

    Oxygen sensor location here (2001 is the same as the 2002):

    http://www.autocodes.com/se...

  • My rav4 2001 model displayed p0141 and p1155 codes what are the likely problem on the car and what is the solution

  • Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
    Read more: http://www.autocodes.com/p0...

    Air/Fuel Ratio Sensor Heater Circuit Malfunction Bank 2 Sensor 1
    Read more: http://www.autocodes.com/p1...

    Since the problem is on different Banks, the most likely problem are the sensors.

  • Auto help me my car bring this code P0141

  • What model and year is your Toyota? You have to replace the Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 to fix the problem.

  • Hi Auto help with my Toyota Avalon 2003 is doing high starting what can I do

  • Hi there, im having problem with with the o2 sensor circuit bank 1 sensor 2 detected. How do i fox it? How much is the cost usually? Thanks

  • What model and year is your Toyota? You probably have to replace the sensor to fix the problem. The price depends on where you do the repair. Range $150 - $300

  • I have a 2002 toyota sequoia, I got a check engine light in October 2019, I replaced the o2 sensors. I still got the check engine light. I replaced the cats. Still got the check engine light I replaced the o2 sensor Bank 1 sensor 2 was the code. The light would stay off for ten minutes. The code i get now is PO141 it goes on as soon as I start the motor. Going to the factory manual some 4,000 pages long, I chased down , I should check the circuit between the o2 sensor and the ECM to find a short if its there or an open circuit if that is there. I studied the ECM plugs E7 and E8, I had a firm understanding which terminals I had to test to find a short. I pulled the plugs off they did not match the diagram I was using. The first thing I noticed is there are 4 terminals vertical in the diagram, in reality there are 3 terminals vertical. The more I looked the more I saw discrepancies,. Then i noticed the diagram is for a 2005 sequoia. Does anyone have a diagram for the 2002 sequoia, or does anyone know if the 05 is the same as the 02

  • As far as I know there are 4 wires going to the Oxygen Sensor. The manual I have also shows 4 wires. Where do you live? some countries and early USA vehicles use only 3 wires.

    Image

    Click here to enlarge image

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play