P2627 Code - Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
Quick Answer
A resistor is installed in the Universal Heated Oxygen Sensor (HO2S) connector for part to part variance. Common causes include Faulty Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (HO2S) harness is open or shorted, Heated Oxygen Sensor (HO2S) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2627 indicates Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (HO2S) harness is open or shorted, Heated Oxygen Sensor (HO2S) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2627 Description
What are the Possible Causes of the DTC P2627?
- Faulty Heated Oxygen Sensor (HO2S)
- Heated Oxygen Sensor (HO2S) harness is open or shorted
- Heated Oxygen Sensor (HO2S) circuit poor electrical connection
How to Fix the DTC P2627?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2627 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2627 code?
Need more information on how to fix the P2627 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2627 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2627 Acura — Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage
- P2627 Buick — HO2S Pump Current Trim Circuit Low Voltage Sensor 1
- P2627 Cadillac — HO2S Pump Current Trim Circuit Low Voltage Sensor 1
- P2627 Chevrolet — HO2S Pump Current Trim Circuit Low Voltage Sensor 1
- P2627 Dodge — Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
- P2627 Ford — Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
- P2627 GMC — HO2S Pump Current Trim Circuit Low Voltage Sensor 1
- P2627 Honda — Air/Fuel Ratio Sensor Bank 1 Sensor 1 Circuit Low Voltage
- P2627 Lincoln — Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
- P2627 Mercury — Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1
Frequently Asked Questions about P2627 Code
1. What are common symptoms of OBDII code P2627?
- Common symptoms include poor fuel efficiency, rough idle, engine misfires, and the illumination of the check engine light.
2. What does the OBDII code P2627 indicate?
- The code P2627 indicates that there is a low pumping current in the circuit of the oxygen sensor located in Bank 1 Sensor 1.
3. What are the possible causes of OBDII code P2627?
- Possible causes include a faulty oxygen sensor, wiring issues in the sensor circuit, a malfunctioning ECM, or a vacuum leak in the engine.
4. How can I diagnose the OBDII code P2627?
- To diagnose the code P2627, you can use an OBDII scanner to retrieve the code and then perform a thorough inspection of the oxygen sensor, wiring, and related components.
5. What is the role of the oxygen sensor in the vehicle's exhaust system?
- The oxygen sensor measures the amount of oxygen in the exhaust gases and helps the engine control module adjust the air-fuel mixture for optimal combustion.
6. Can I continue driving with OBDII code P2627 present?
- It is not recommended to drive with the code P2627 present, as it can lead to decreased fuel efficiency and potential engine performance issues.
7. How can I repair OBDII code P2627?
- Repairing the code P2627 involves inspecting and potentially replacing the oxygen sensor, checking and repairing any wiring issues, and resetting the fault code with an OBDII scanner.
8. Is it possible to clear the OBDII code P2627 without fixing the underlying issue?
- Clearing the code without fixing the underlying issue may temporarily turn off the check engine light, but the problem will likely persist and trigger the code again later.
9. How long does it take to repair OBDII code P2627?
- The repair time for the code P2627 varies depending on the exact cause of the issue and the complexity of the repair. It can range from a quick sensor replacement to a more involved wiring repair.
10. Can a DIY enthusiast fix OBDII code P2627 at home?
- Depending on your level of automotive knowledge and experience, it may be possible to fix the OBDII code P2627 at home by following repair guides and using the necessary tools and equipment.
Discuss the causes and fixes for P2627 OBDII Code
Code P2627 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
