AutoCodes – Mercury – P2627 Mercury

P2627 Mercury Code - Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1

Quick Answer

A resistor is installed in the Universal Heated Oxygen Sensor (HO2S) connector for part to part variance. Common causes include Faulty Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (HO2S) harness is open or shorted, Heated Oxygen Sensor (HO2S) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2627 Mercury indicates Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1.
Common causes: Common causes include Faulty Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (HO2S) harness is open or shorted, Heated Oxygen Sensor (HO2S) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,499

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2627 Mercury Description

A resistor is installed in the Universal Heated Oxygen Sensor (HO2S) connector for part to part variance. The Powertrain Control Module (PCM) determines the value of this resistor by taking multiple measurements of the resistor during each ignition ON event. The PCM uses this value in order to compensate for the variance in the pumping current signal. The test fails if the PCM determines the resistance value is too high.

OBDII Code P2627 Mercury - Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1 - AutoCodes.com — P2627 Mercury Code - Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P2627 Mercury?

Faulty Heated Oxygen Sensor (HO2S)
Heated Oxygen Sensor (HO2S) harness is open or shorted
Heated Oxygen Sensor (HO2S) circuit poor electrical connection

How to Fix the DTC P2627 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2627 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2627 Mercury code?

Need more information on how to fix the P2627 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2627 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2627 Mercury Code

1. What are the common symptoms of OBDII code P2627 in a Mercury vehicle?

- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and potential stalling.

2. What does the OBDII code P2627 indicating "Oxygen Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 1" mean for a Mercury?

- This code indicates a low voltage condition in the oxygen sensor pumping current trim circuit for the upstream oxygen sensor in Bank 1.

3. What are the possible causes of OBDII code P2627 in a Mercury?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, a failed oxygen sensor heater circuit, or an issue with the engine control module (ECM).

4. How can I diagnose the OBDII code P2627 in my Mercury?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and related wiring, and testing the oxygen sensor heater circuit for proper function.

5. Can driving with OBDII code P2627 in a Mercury cause further damage?

- While driving with this code is not recommended, it may lead to decreased fuel efficiency and potential engine performance issues if left unaddressed for an extended period.

6. Is it safe to continue driving my Mercury with OBDII code P2627 present?

- It is generally not recommended to drive with this code present, as it can impact engine performance and fuel efficiency. It is best to address the underlying issue promptly.

7. How can I repair OBDII code P2627 in my Mercury?

- Repair options may include replacing the oxygen sensor, repairing or replacing damaged wiring or connectors, checking and repairing the oxygen sensor heater circuit, or reprogramming the ECM.

8. Are there any DIY tips for addressing OBDII code P2627 in a Mercury?

- DIY tips may include checking for loose or damaged wiring, inspecting the oxygen sensor for physical damage, and ensuring proper connections to the sensor and ECM.

9. Can a mechanic easily fix OBDII code P2627 in a Mercury?

- A qualified mechanic should be able to diagnose and repair OBDII code P2627 by inspecting the oxygen sensor, testing related circuits, and replacing faulty components as needed.

10. How much does it typically cost to repair OBDII code P2627 in a Mercury?

- The cost of repairing OBDII code P2627 can vary depending on the exact cause of the issue, but it may range from $150 to $500, including parts and labor.