AutoCodes – Generic – P1335

P1335 Code - Crankshaft Position Sensor

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1335 indicates Crankshaft Position Sensor.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 67,600

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1335 Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P1335 - Crankshaft Position Sensor - AutoCodes.com — P1335 Code - Crankshaft Position Sensor

What does this mean?

What are the Possible Causes of the DTC P1335?

Faulty Crankshaft Position Sensor
Crankshaft Position (CKP) Sensor harness is open or shorted
Crankshaft Position (CKP) Sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P1335?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1335 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1335 code?

Need more information on how to fix the P1335 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1335 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1335 Audi — Engine Torque Control 2 Adaption At Limit
P1335 Buick — Crankshaft Position Circuit
P1335 Cadillac — Crankshaft Position Circuit
P1335 Chevrolet — Crankshaft Position Circuit
P1335 Ford — EGR Position Sensor Minimum Stop Performance
P1335 GMC — Crankshaft Position Circuit
P1335 Hyundai — #5 MF Signal Line Short
P1335 Infiniti — Crankshaft Position Sensor
P1335 Jaguar — Crankshaft Position Circuit
P1335 Lexus — Crankshaft Position Sensor Circuit Fault
P1335 Nissan — Crankshaft Position Sensor
P1335 Toyota — Crankshaft Position Sensor Circuit Fault
P1335 Volkswagen — Engine Torque Control 2 Adaption At Limit

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.