P1335 Nissan Code - Crankshaft Position Sensor
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1335 Nissan indicates Crankshaft Position Sensor.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1335 Nissan Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P1335 Nissan?
- Faulty Crankshaft Position Sensor
- Crankshaft Position (CKP) Sensor harness is open or shorted
- Crankshaft Position (CKP) Sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P1335 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1335 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1335 Nissan code?
Need more information on how to fix the P1335 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1335 Nissan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1335 Nissan Code
1. What are the common symptoms of OBDII code P1335 in a Nissan related to the Crankshaft Position Sensor?
- Common symptoms include engine misfires, rough idling, stalling, and difficulty starting the vehicle.
2. What are the possible causes of OBDII code P1335 in a Nissan related to the Crankshaft Position Sensor?
- Possible causes include a faulty crankshaft position sensor, wiring issues, sensor alignment problems, or issues with the sensor's signal.
3. How can I diagnose the Crankshaft Position Sensor issue causing OBDII code P1335 in my Nissan?
- You can diagnose the issue by using an OBDII scanner to read the code, visually inspecting the sensor and its wiring, and testing the sensor's signal using a multimeter.
4. Can a faulty Crankshaft Position Sensor causing OBDII code P1335 be repaired, or does it need to be replaced?
- In most cases, a faulty Crankshaft Position Sensor causing P1335 will need to be replaced rather than repaired.
5. Are there any tips for repairing OBDII code P1335 related to the Crankshaft Position Sensor in a Nissan?
- Ensure the new sensor is properly aligned during installation, use OEM or high-quality replacement parts, and clear the code after replacing the sensor.
6. How crucial is it to address OBDII code P1335 linked to the Crankshaft Position Sensor in a Nissan promptly?
- It is important to address this issue promptly to prevent potential damage to the engine and to ensure the vehicle runs smoothly and efficiently.
7. Can a DIY enthusiast replace the Crankshaft Position Sensor to fix OBDII code P1335 in a Nissan?
- Yes, replacing the Crankshaft Position Sensor can be a DIY project for those with some mechanical experience and the necessary tools.
8. Will resetting the OBDII code P1335 related to the Crankshaft Position Sensor in a Nissan make it go away permanently?
- Resetting the code without addressing the underlying issue will not make it go away permanently; the sensor issue must be fixed to prevent the code from reappearing.
9. Are there any preventive maintenance steps to avoid encountering OBDII code P1335 due to the Crankshaft Position Sensor in a Nissan?
- Regularly inspecting and maintaining the sensor, checking for any wiring damage, and addressing any engine performance issues promptly can help prevent this code from appearing.
10. How long does it typically take to replace the Crankshaft Position Sensor causing OBDII code P1335 in a Nissan?
- The replacement process can vary depending on the vehicle model and the location of the sensor, but it generally takes around 1-2 hours to complete the replacement.
Discuss the causes and fixes for P1335 Nissan OBDII Code
Code P1335 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
