P1335 Audi Code - Engine Torque Control 2 Adaption At Limit
Quick Answer
P1335 Audi indicates Engine Torque Control 2 Adaption At Limit. Common causes include Faulty Mass Air Flow (MAF) Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1335 Audi indicates Engine Torque Control 2 Adaption At Limit.
- Common causes
- Common causes include Faulty Mass Air Flow (MAF) Sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1335 Audi Description
What are the Possible Causes of the DTC P1335 Audi?
- Faulty Mass Air Flow (MAF) Sensor
How to Fix the DTC P1335 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1335 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1335 Audi code?
Need more information on how to fix the P1335 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1335 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1335 Audi Code
1. What does the OBDII code P1335 mean on an Audi?
P1335 on an Audi indicates "Engine Torque Control 2 Adaptation At Limit," meaning the engine control module (ECM) has detected issues with torque management.
2. What are the common symptoms of the P1335 code in an Audi?
Symptoms may include reduced engine performance, the check engine light turning on, poor acceleration, or erratic shifting in automatic transmissions.
3. What causes the P1335 code to appear on an Audi?
Possible causes include faulty throttle position sensors, issues with the ECM software, a malfunctioning torque management system, or wiring/connection problems.
4. Is it safe to drive with the P1335 code active?
Driving with the P1335 code can lead to reduced engine performance and potential damage over time. It's best to address the issue promptly.
5. How do you diagnose the P1335 code on an Audi?
Diagnosis involves scanning for additional codes, inspecting throttle sensors, testing the wiring and connections, and checking ECM adaptation values.
6. Can a dirty throttle body cause the P1335 code?
Yes, a dirty or malfunctioning throttle body can interfere with torque management and trigger the P1335 code.
7. How is the P1335 code typically fixed on an Audi?
Repairs may include cleaning or replacing the throttle body, updating ECM software, repairing wiring issues, or recalibrating the torque control system.
8. Does the P1335 code require ECM replacement?
ECM replacement is rarely needed and should only be considered after thoroughly diagnosing all related components and software.
9. Can a faulty accelerator pedal position sensor cause the P1335 code?
Yes, a faulty accelerator pedal position sensor can disrupt torque control and trigger the P1335 code.
10. How much does it cost to fix the P1335 code on an Audi?
Repair costs vary depending on the cause but typically range from $150 to $500, including diagnostics, cleaning, or replacing components.
Discuss the causes and fixes for P1335 Audi OBDII Code
Code P1335 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
