P0368 Code - Camshaft Position Sensor 'B' Circuit High Bank 1
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0368 indicates Camshaft Position Sensor 'B' Circuit High Bank 1.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0368 Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0368?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0368?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0368 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0368 code?
Need more information on how to fix the P0368 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0368 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0368 Audi — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 BMW — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 Lexus — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 MINI — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 Saturn — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 Scion — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 Toyota — Camshaft Position Sensor 'B' Circuit High Bank 1
- P0368 Volkswagen — Camshaft Position Sensor 'B' Circuit High Bank 1
Frequently Asked Questions about P0368 Code
1. What are the common symptoms of OBDII code P0368 (Camshaft Position Sensor 'B' Circuit High Bank 1)?
- Common symptoms include rough idling, engine misfires, poor acceleration, and potential stalling of the vehicle.
2. What can cause the OBDII code P0368 to trigger?
- The code P0368 is typically triggered by a faulty camshaft position sensor, damaged wiring or connectors, or issues with the sensor circuit.
3. How serious is the OBDII code P0368?
- While the code P0368 may not cause immediate harm to the engine, it can lead to poor engine performance and potential damage over time if left unresolved.
4. How can I diagnose the cause of OBDII code P0368?
- Diagnosis involves checking the camshaft position sensor, inspecting the wiring and connectors for damage, and using a scan tool to monitor sensor readings.
5. Can I drive my vehicle with OBDII code P0368?
- It is not recommended to drive with the code P0368 present, as it can lead to further damage or unsafe driving conditions.
6. How can I repair OBDII code P0368?
- Repair options include replacing the camshaft position sensor, repairing damaged wiring or connectors, and clearing the code with a scan tool.
7. How much does it cost to fix OBDII code P0368?
- The cost of fixing the code P0368 can vary depending on the extent of the issue, but it typically ranges from $100 to $300 for parts and labor.
8. Can a DIY enthusiast fix OBDII code P0368?
- While some DIY enthusiasts may be able to replace the camshaft position sensor themselves, diagnosing and repairing wiring issues may require professional help.
9. Will resetting the OBDII code P0368 make it go away permanently?
- Resetting the code may temporarily remove the warning light, but if the underlying issue is not fixed, the code is likely to reappear.
10. How long does it take to repair OBDII code P0368?
- The repair time for the code P0368 can vary depending on the specific issue, but it typically takes 1-2 hours for a professional mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P0368 OBDII Code
Code P0368 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
