P0368 Audi Code - Camshaft Position Sensor 'B' Circuit High Bank 1
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0368 Audi indicates Camshaft Position Sensor 'B' Circuit High Bank 1.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0368 Audi Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0368 Audi?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0368 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0368 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0368 Audi code?
Need more information on how to fix the P0368 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0368 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0368 Audi Code
1. What does the OBDII code P0368 mean on an Audi?
P0368 indicates a "Camshaft Position Sensor 'B' Circuit High" issue on Bank 1, meaning the signal from the camshaft position sensor is outside of the expected range.
2. What are the common symptoms of P0368 in an Audi?
Symptoms include rough idling, poor acceleration, engine misfires, decreased fuel efficiency, difficulty starting, and the Check Engine Light being illuminated.
3. What causes the P0368 code on an Audi?
Potential causes include a faulty camshaft position sensor, damaged wiring or connectors, a malfunctioning PCM/ECU, or timing chain/belt issues.
4. Can I drive my Audi with a P0368 code?
Driving with this code is not recommended, as it can lead to reduced engine performance, potential stalling, or further engine damage if left unresolved.
5. How do I diagnose the P0368 code on an Audi?
Start by checking the camshaft position sensor and its wiring for damage or corrosion. Use a multimeter to test the sensor's voltage and refer to the vehicle's service manual for specific resistance values.
6. How can I fix the P0368 code in my Audi?
Repairs may include replacing the camshaft position sensor, repairing or replacing damaged wiring or connectors, or addressing timing chain/belt issues if they are misaligned.
7. How much does it cost to repair a P0368 code in an Audi?
Repair costs can range from $100 to $300 for sensor replacement, while more extensive repairs like timing chain/belt adjustments can cost significantly more, depending on labor rates and parts.
8. Can a bad camshaft position sensor cause a P0368 code?
Yes, a faulty or malfunctioning camshaft position sensor is one of the most common causes of the P0368 code.
9. Will clearing the P0368 code with a scan tool fix the problem?
Clearing the code will turn off the Check Engine Light temporarily, but the issue will likely return if the underlying problem isn’t resolved.
10. Is P0368 specific to Audi vehicles?
No, P0368 is a generic OBDII code applicable to all vehicles with OBDII systems, but the specific diagnosis and repair process may vary by make and model.
Discuss the causes and fixes for P0368 Audi OBDII Code
Code P0368 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
