P0368 MINI Code - Camshaft Position Sensor 'B' Circuit High Bank 1
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0368 MINI indicates Camshaft Position Sensor 'B' Circuit High Bank 1.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0368 MINI Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0368 MINI?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0368 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0368 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0368 MINI code?
Need more information on how to fix the P0368 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0368 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0368 MINI Code
1. What does the OBDII code P0368 mean for a MINI?
P0368 indicates a high voltage issue in the Camshaft Position Sensor 'B' Circuit on Bank 1, which may affect the engine's timing and performance.
2. What are the symptoms of code P0368 in a MINI?
Common symptoms include a check engine light, rough idling, reduced engine performance, hard starting, or stalling.
3. What causes the P0368 code to appear in a MINI?
Possible causes include a faulty camshaft position sensor, damaged wiring or connectors, a failed PCM, or issues with the timing components.
4. How can I diagnose the P0368 code in my MINI?
Start by checking the sensor’s wiring and connectors for damage or corrosion, test the sensor’s voltage output, and inspect the timing components for wear or misalignment.
5. Can I drive my MINI with a P0368 code?
Driving with this code is not recommended, as it can lead to engine performance issues and potential damage if ignored.
6. How do I fix the P0368 code on a MINI?
Repairs may include replacing the camshaft position sensor, repairing damaged wiring, or addressing timing component issues if necessary.
7. Where is the Camshaft Position Sensor 'B' located on a MINI?
Sensor 'B' is typically located on the exhaust camshaft of Bank 1, which is the side of the engine with cylinder 1.
8. How much does it cost to fix the P0368 code on a MINI?
Repair costs can range from $100 to $300 for sensor replacement, but may increase if wiring or timing components need repair.
9. Can a low battery cause code P0368 in a MINI?
While unlikely, electrical issues such as a weak battery or charging system problems could potentially affect sensor performance.
10. How do I prevent the P0368 code from returning in my MINI?
Perform regular maintenance, inspect wiring for damage, and promptly address any engine performance issues to reduce the likelihood of recurrence.
Discuss the causes and fixes for P0368 MINI OBDII Code
Code P0368 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
