C2132 Code - No Signal From Transmitter ID 2 In 2nd Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2132 indicates No Signal From Transmitter ID 2 In 2nd Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2132 Description
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2132?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning Antenna and Receiver
- Tire Pressure Warning Antenna and Receiver harness is open or shorted
- Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
- Faulty Tire Pressure Warning ECU
How to Fix the DTC C2132?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2132 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2132 code?
Need more information on how to fix the C2132 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2132 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C2132 Lexus — No Signal From Transmitter ID 2 In 2nd Mode
- C2132 Scion — No Signal From Transmitter ID 2 In 2nd Mode
- C2132 Toyota — No Signal From Transmitter ID 2 In 2nd Mode
Frequently Asked Questions about C2132 Code
1. What are the common symptoms of OBDII code C2132?
- Common symptoms of code C2132 include a malfunction indicator light (MIL) illuminated on the dashboard, tire pressure monitoring system (TPMS) warning light, and issues with the TPMS system not functioning properly.
2. What are the possible causes of OBDII code C2132?
- The code C2132, "No Signal From Transmitter ID 2 In 2nd Mode," can be caused by a faulty tire pressure sensor, damaged wiring in the TPMS system, low tire pressure, or a problem with the TPMS control module.
3. How can I diagnose the cause of OBDII code C2132?
- To diagnose OBDII code C2132, you can start by checking the tire pressure in all four tires, inspecting the TPMS sensors for damage, and using a TPMS diagnostic tool to identify which specific sensor is not transmitting a signal.
4. Can low tire pressure trigger OBDII code C2132?
- Yes, low tire pressure in one or more tires can trigger OBDII code C2132 because the TPMS system relies on accurate pressure readings from all sensors to function properly.
5. Is it safe to continue driving with OBDII code C2132 present?
- It is generally safe to continue driving with code C2132, but you should address the underlying issue promptly to ensure the proper functioning of the TPMS system for your safety and to comply with regulations.
6. How can I reset OBDII code C2132 after repairing the issue?
- After repairing the underlying issue causing code C2132, you can reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes to clear the fault code from the system.
7. Can weather conditions affect the transmission of signals triggering OBDII code C2132?
- Extreme weather conditions, such as very low temperatures, can potentially affect the transmission of signals from TPMS sensors, leading to the triggering of code C2132 due to communication issues.
8. Will replacing the TPMS sensor fix OBDII code C2132?
- Replacing a faulty TPMS sensor that is not transmitting a signal can often resolve OBDII code C2132, but it is essential to diagnose the specific issue correctly to ensure an effective repair.
9. How important is it to address OBDII code C2132 promptly?
- Promptly addressing OBDII code C2132 is crucial to maintain the proper functioning of the TPMS system, ensuring accurate tire pressure monitoring for optimal safety, tire wear, and fuel efficiency.
10. Can a DIY enthusiast repair OBDII code C2132, or is professional assistance recommended?
- While some DIY enthusiasts may be able to address OBDII code C2132 by replacing a faulty TPMS sensor or checking wiring connections, professional assistance is recommended for accurate diagnosis and complex repairs involving the TPMS system.
Discuss the causes and fixes for C2132 OBDII Code
Code C2132 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
