C2132 Toyota Code - No Signal From Transmitter ID 2 In 2nd Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2132 Toyota indicates No Signal From Transmitter ID 2 In 2nd Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2132 Toyota Description
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2132 Toyota?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning Antenna and Receiver
- Tire Pressure Warning Antenna and Receiver harness is open or shorted
- Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
- Faulty Tire Pressure Warning ECU
How to Fix the DTC C2132 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2132 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2132 Toyota code?
Need more information on how to fix the C2132 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2132 Toyota code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2132 Toyota Code
1. What are the common symptoms of OBDII code C2132 in a Toyota?
The common symptoms include the tire pressure monitoring system (TPMS) warning light staying illuminated, inaccurate tire pressure readings, and potential issues with the TPMS system.
2. What does the OBDII code C2132 "No Signal From Transmitter ID 2 In 2nd Mode" mean in a Toyota?
This code indicates that the TPMS system is not receiving a signal from the transmitter ID 2 in the second mode, which could be due to a communication error or a faulty sensor.
3. What are the possible causes of OBDII code C2132 in a Toyota?
Possible causes include a malfunctioning TPMS sensor, low tire pressure, sensor battery failure, sensor communication issues, or wiring/connectivity problems within the TPMS system.
4. How can I diagnose the issue related to OBDII code C2132 in my Toyota?
Diagnosis involves checking the tire pressure in all tires, inspecting the TPMS sensors, testing the sensor batteries, and scanning the TPMS system with a diagnostic tool to identify the specific problem.
5. Can I still drive my Toyota with the OBDII code C2132 present?
It is generally safe to drive with this code, but it is important to address the underlying TPMS issue promptly to ensure accurate tire pressure monitoring and overall vehicle safety.
6. How can I repair OBDII code C2132 in my Toyota?
Depending on the cause, repairs may involve replacing a faulty TPMS sensor, reprogramming the sensor, addressing wiring issues, or resetting the TPMS system using a diagnostic tool.
7. Is it possible to reset the TPMS system to clear the C2132 code in a Toyota?
Yes, resetting the TPMS system using a diagnostic tool can clear the code, but it is important to verify that the underlying issue causing the code has been resolved to prevent it from reoccurring.
8. Are there any DIY tips for troubleshooting OBDII code C2132 in a Toyota?
DIY tips include checking tire pressures, ensuring proper sensor installation, inspecting sensor batteries, and visually examining the TPMS system components for any visible damage or corrosion.
9. How common is the OBDII code C2132 "No Signal From Transmitter ID 2 In 2nd Mode" in Toyota vehicles?
This code is relatively common in Toyota vehicles equipped with a TPMS system, especially in older models where sensor batteries may have reached the end of their lifespan or due to sensor communication issues.
10. Can I prevent OBDII code C2132 from occurring in my Toyota?
Regularly checking tire pressures, maintaining TPMS sensors, and addressing any issues with the TPMS system promptly can help prevent the recurrence of code C2132 in your Toyota.
Discuss the causes and fixes for C2132 Toyota OBDII Code
Code C2132 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
