AutoCodes – Scion – C2132 Scion

C2132 Scion Code - No Signal From Transmitter ID 2 In 2nd Mode

Quick Answer

The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C2132 Scion indicates No Signal From Transmitter ID 2 In 2nd Mode.
Common causes: Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 581

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C2132 Scion Description

The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the Tire Pressure Warning ECU. The ECU compares the measured tire pressure values with the tire pressure threshold. When the measured tire pressure value is less than this threshold, the warning light in the combination meter turns on.
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.

OBDII Code C2132 Scion - No Signal From Transmitter ID 2 In 2nd Mode - AutoCodes.com — C2132 Scion Code - No Signal From Transmitter ID 2 In 2nd Mode

What does this mean?

What are the Possible Causes of the DTC C2132 Scion?

Faulty Tire Pressure Warning Valve and Transmitter
Faulty Tire Pressure Warning Antenna and Receiver
Tire Pressure Warning Antenna and Receiver harness is open or shorted
Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
Faulty Tire Pressure Warning ECU

How to Fix the DTC C2132 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2132 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2132 Scion code?

Need more information on how to fix the C2132 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2132 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2132 Scion Code

1. What are the common symptoms of OBDII code C2132 in a Scion related to "No Signal From Transmitter ID 2 In 2nd Mode"?

The common symptoms include issues with tire pressure monitoring system (TPMS) functionality, warning lights illuminated on the dashboard, and difficulty in monitoring tire pressure.

2. What are the possible causes of OBDII code C2132 in a Scion?

The code C2132 "No Signal From Transmitter ID 2 In 2nd Mode" in a Scion can be caused by a faulty tire pressure sensor, damaged wiring or connectors, low tire pressure, or issues with the TPMS module.

3. How can I diagnose the cause of OBDII code C2132 in my Scion?

Diagnosing OBDII code C2132 involves checking the tire pressure in all tires, inspecting the condition of the tire pressure sensors, testing the wiring and connectors for any damage, and using a TPMS diagnostic tool to identify the specific issue.

4. Can I still drive my Scion with OBDII code C2132 present?

While it may be possible to drive your Scion with the OBDII code C2132 present, it is not recommended as it indicates a malfunction in the TPMS system, which is crucial for monitoring tire pressure and ensuring safe driving conditions.

5. How can I reset OBDII code C2132 in my Scion?

Resetting OBDII code C2132 involves fixing the underlying issue causing the code, such as replacing a faulty tire pressure sensor, repairing damaged wiring, or addressing low tire pressure. Once the issue is resolved, the code can be cleared using an OBDII scanner.

6. Is it safe to ignore OBDII code C2132 in my Scion?

Ignoring OBDII code C2132 can lead to inaccurate tire pressure readings, potential safety hazards due to improperly inflated tires, and continued illumination of warning lights on the dashboard. It is not advisable to ignore this code.

7. How much does it cost to repair OBDII code C2132 in a Scion?

The cost of repairing OBDII code C2132 in a Scion can vary depending on the specific cause of the issue. It may involve replacing a tire pressure sensor, repairing wiring, or addressing other TPMS system components. Costs can range from relatively inexpensive to more costly repairs.

8. Can weather conditions affect OBDII code C2132 in a Scion?

Extreme weather conditions, particularly temperature changes, can impact tire pressure readings and potentially trigger OBDII code C2132 in a Scion. It's important to monitor tire pressure regularly, especially during temperature fluctuations.

9. How often should I check my tire pressure to prevent OBDII code C2132 in my Scion?

To prevent OBDII code C2132 related to tire pressure issues, it's recommended to check your tire pressure at least once a month or before long trips. Regular maintenance helps ensure proper tire pressure and functioning of the TPMS system.

10. Can a DIY enthusiast repair OBDII code C2132 in a Scion?

Depending on your skill level and access to tools, some DIY enthusiasts may be able to repair OBDII code C2132 by replacing a faulty tire pressure sensor or addressing minor wiring issues. However, complex TPMS system problems may require professional assistance.