C1472 Code - Acceleration Sensor
Quick Answer
The Skid Control ECU receives signals from the Yaw Rate and Acceleration Sensor (for separate type) or Yaw Rate and Acceleration Sensor (airbag sensor assembly) (for built-in type) via the CAN communication system. Common causes include Faulty Yaw Rate and Acceleration Sensor, Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1472 indicates Acceleration Sensor.
- Common causes
- Common causes include Faulty Yaw Rate and Acceleration Sensor, Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1472 Description
What are the Possible Causes of the DTC C1472?
- Faulty Yaw Rate and Acceleration Sensor
- Yaw Rate and Acceleration Sensor harness is open or shorted
- Yaw Rate and Acceleration Sensor circuit poor electrical connection
How to Fix the DTC C1472?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1472 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1472 code?
Need more information on how to fix the C1472 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1472 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1472 Chrysler — Transfer Case Clutch Control Performance Or Incorrect Operation
- C1472 Dodge — Transfer Case Clutch Control Performance Or Incorrect Operation
- C1472 Ford — Master Cylinder Pressure/Travel Plausibility Failure
- C1472 Jeep — Transfer Case Clutch Control Performance Or Incorrect Operation
- C1472 Lexus — Acceleration Sensor
- C1472 Lincoln — Master Cylinder Pressure/Travel Plausibility Failure
- C1472 Mercury — Master Cylinder Pressure/Travel Plausibility Failure
- C1472 Scion — Acceleration Sensor
- C1472 Toyota — Acceleration Sensor
Frequently Asked Questions about C1472 Code
1. What are common symptoms of OBDII code C1472 related to the acceleration sensor?
The common symptoms include issues with vehicle stability control, traction control, and ABS warning lights illuminating on the dashboard.
2. What are the possible causes of OBDII code C1472 indicating a problem with the acceleration sensor?
Possible causes include a faulty acceleration sensor, damaged wiring or connectors, or issues with the sensor's calibration.
3. How can I diagnose the OBDII code C1472 related to the acceleration sensor?
Diagnosis typically involves using a diagnostic scanner to retrieve the fault code and then performing a visual inspection of the sensor and its connections.
4. Can a DIY enthusiast repair OBDII code C1472 related to the acceleration sensor?
While some may attempt DIY repairs, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair of the acceleration sensor issue.
5. Is it safe to continue driving with OBDII code C1472 indicating an acceleration sensor problem?
It is not recommended to drive the vehicle with this issue as it can affect the stability and control systems, potentially compromising safety.
6. How much does it cost to repair OBDII code C1472 related to the acceleration sensor?
The repair costs can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, or recalibration, which can range from moderate to expensive.
7. Can a problem with the acceleration sensor cause poor acceleration performance in a vehicle?
Yes, a malfunctioning acceleration sensor can impact the vehicle's performance, including acceleration responsiveness and overall driving experience.
8. Are there any preventive maintenance tips to avoid encountering OBDII code C1472 related to the acceleration sensor?
Regular inspection of the sensor and its connections, as well as following the manufacturer's recommended maintenance schedule, can help prevent issues with the acceleration sensor.
9. How long does it typically take to repair OBDII code C1472 associated with the acceleration sensor?
The repair time can vary based on the specific cause of the issue and the complexity of the repair process, but it may take a few hours to a full day to address the acceleration sensor problem.
10. Can a failing acceleration sensor lead to other vehicle issues besides triggering OBDII code C1472?
Yes, a failing acceleration sensor can potentially affect other vehicle systems that rely on its input, such as the transmission, engine management, and overall driving dynamics.
Discuss the causes and fixes for C1472 OBDII Code
Code C1472 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
