C1472 Chrysler Code - Transfer Case Clutch Control Performance Or Incorrect Operation
Quick Answer
The Drive Train Control Module (DTCM) detects an overheat condition due to an excessive difference in speed across the Transfer Case from hard driving conditions (Mud, Sand, Snow, 2WD Chassis dynamometer etc.). Common causes include Driving Conditions, Faulty Transfer Case, Faulty Drive Train Control Module (DTCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1472 Chrysler indicates Transfer Case Clutch Control Performance Or Incorrect Operation.
- Common causes
- Common causes include Driving Conditions, Faulty Transfer Case, Faulty Drive Train Control Module (DTCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1472 Chrysler Description
What are the Possible Causes of the DTC C1472 Chrysler?
- Driving Conditions
- Faulty Transfer Case
- Faulty Drive Train Control Module (DTCM)
How to Fix the DTC C1472 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1472 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1472 Chrysler code?
Need more information on how to fix the C1472 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1472 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1472 Chrysler Code
1. What does the OBDII code C1472 mean on a Chrysler vehicle?
C1472 indicates a problem with the performance or operation of the transfer case clutch control system, which is responsible for engaging and distributing power in the drivetrain.
2. What are common symptoms of the C1472 code?
Symptoms may include difficulty engaging four-wheel drive, unusual noises from the transfer case, erratic shifting between drive modes, or an illuminated Check Engine or Service 4WD light.
3. What causes the C1472 code to appear?
Common causes include a faulty transfer case clutch, a malfunctioning transfer case control module, wiring or connector issues, or low or contaminated transfer case fluid.
4. How can I diagnose the C1472 code?
Start by inspecting the transfer case wiring and connectors for damage or corrosion. Check the transfer case fluid level and condition, and use a scan tool to monitor the transfer case control module’s data and operation.
5. Can driving with the C1472 code cause further damage?
Yes, continuing to drive with this code may lead to additional wear on the transfer case, drivetrain components, or result in a complete loss of four-wheel drive capability.
6. Is it possible to fix the C1472 code without replacing parts?
In some cases, cleaning and securing electrical connections, reprogramming the transfer case control module, or replacing the transfer case fluid may resolve the issue without replacing major components.
7. How much does it cost to repair the C1472 code?
Repair costs vary depending on the issue, ranging from $100 for fluid replacement or wiring repairs to over $1,000 for a new transfer case or control module.
8. Can a software update fix the C1472 code?
Yes, in some cases, a software update for the transfer case control module may resolve the issue if it’s related to incorrect programming or calibration.
9. How do I prevent the C1472 code from returning?
Regularly maintain the transfer case by checking and replacing fluid as recommended, inspect electrical connections for damage, and address drivetrain issues promptly.
10. Do I need a professional mechanic to fix the C1472 code?
While basic inspections can be done at home, diagnosing and repairing this code often require specialized tools and expertise, so consulting a professional mechanic is recommended.
Discuss the causes and fixes for C1472 Chrysler OBDII Code
Code C1472 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
