C1472 Jeep Code - Transfer Case Clutch Control Performance Or Incorrect Operation
Quick Answer
The Drive Train Control Module (DTCM) detects an overheat condition due to an excessive difference in speed across the Transfer Case from hard driving conditions (Mud, Sand, Snow, 2WD Chassis dynamometer etc.). Common causes include Driving Conditions, Faulty Transfer Case, Faulty Drive Train Control Module (DTCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1472 Jeep indicates Transfer Case Clutch Control Performance Or Incorrect Operation.
- Common causes
- Common causes include Driving Conditions, Faulty Transfer Case, Faulty Drive Train Control Module (DTCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1472 Jeep Description
What are the Possible Causes of the DTC C1472 Jeep?
- Driving Conditions
- Faulty Transfer Case
- Faulty Drive Train Control Module (DTCM)
How to Fix the DTC C1472 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1472 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1472 Jeep code?
Need more information on how to fix the C1472 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1472 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1472 Jeep Code
1. What does the OBDII code C1472 mean for a Jeep?
C1472 indicates an issue with the transfer case clutch control, specifically a performance problem or incorrect operation detected by the vehicle's control module.
2. What are the common symptoms of a C1472 code on a Jeep?
Symptoms may include difficulty shifting into or out of 4WD, unusual noises from the transfer case, 4WD not engaging properly, or the 4WD warning light illuminating on the dashboard.
3. What causes the C1472 code to appear on a Jeep?
Common causes include a malfunctioning transfer case clutch, damaged wiring or connectors, a faulty transfer case control module, or low or contaminated transfer case fluid.
4. Can driving with the C1472 code cause further damage?
Yes, continuing to drive with this code may lead to further damage to the transfer case or drivetrain components, especially if the 4WD system is not functioning properly.
5. How can I diagnose the cause of the C1472 code on my Jeep?
Diagnosis involves checking the transfer case fluid level and condition, inspecting wiring and connectors for damage, and testing the transfer case clutch and control module for proper operation.
6. Is the C1472 code specific to Jeeps, or can it occur in other vehicles?
While the C1472 code is commonly associated with Jeep vehicles, it can also appear in other vehicles equipped with a similar transfer case system.
7. What repairs are typically needed to fix the C1472 code?
Repairs may include replacing the transfer case clutch, repairing or replacing damaged wiring, updating or replacing the transfer case control module, or changing the transfer case fluid.
8. How much does it cost to fix the C1472 code on a Jeep?
Repair costs can vary widely but typically range from $200 to $1,000, depending on whether the issue is minor (like fluid replacement) or major (like transfer case component replacement).
9. Can I reset the C1472 code without fixing the problem?
You can clear the code temporarily with an OBDII scanner, but if the underlying issue is not resolved, the code will likely reappear.
10. How can I prevent the C1472 code from occurring again?
Regular maintenance, including changing the transfer case fluid at recommended intervals and inspecting the 4WD system components, can help prevent this code from recurring.
Discuss the causes and fixes for C1472 Jeep OBDII Code
Code C1472 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
