C1440 Code - Pressure Transducer Main/Primary Signal Faulted
Quick Answer
The pressure transducer is integral to the Hydraulic Control Unit (HCU). Common causes include Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted, Hydraulic Control Unit (HCU) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1440 indicates Pressure Transducer Main/Primary Signal Faulted.
- Common causes
- Common causes include Faulty Hydraulic Control Unit (HCU), Hydraulic Control Unit (HCU) harness is open or shorted, Hydraulic Control Unit (HCU) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1440 Description
When the brake pedal is pressed, the stop lamp switch closes and a voltage is sent to the Powertrain Control Module (PCM). The PCM then sends a message over the High-Speed Controller Area Network (HS-CAN) to the ABS module indicating that the brake pedal has been pressed. DTCs set in the ignition cycle can only be cleared by cycling the ignition off and on once the fault has been corrected.
This DTC sets in every ignition cycle if the signal that the pressure transducer sends to the ABS module does not agree with the stop lamp switch position.
What are the Possible Causes of the DTC C1440?
- Faulty Hydraulic Control Unit (HCU)
- Hydraulic Control Unit (HCU) harness is open or shorted
- Hydraulic Control Unit (HCU) circuit poor electrical connection
How to Fix the DTC C1440?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1440 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1440 code?
Need more information on how to fix the C1440 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1440 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1440 Ford — Pressure Transducer Main/Primary Signal Faulted
- C1440 Lexus — Steering Angle Sensor Unusual Bank Angle Detected
- C1440 Lincoln — Pressure Transducer Main/Primary Signal Faulted
- C1440 Mercury — Pressure Transducer Main/Primary Signal Faulted
- C1440 Scion — Steering Angle Sensor Unusual Bank Angle Detected
- C1440 Toyota — Steering Angle Sensor Unusual Bank Angle Detected
Frequently Asked Questions about C1440 Code
1. What are the common symptoms of OBDII code C1440 (Pressure Transducer Main/Primary Signal Faulted)?
The common symptoms of code C1440 include issues with the vehicle's brake system, such as decreased brake performance, ABS warning light illuminated on the dashboard, and potential loss of traction control functionality.
2. What are the possible causes of OBDII code C1440?
The main causes of code C1440 include a faulty pressure transducer, wiring issues, damaged connectors, or a malfunction in the ABS control module.
3. How can I diagnose the issue related to OBDII code C1440?
To diagnose the issue, you can use a diagnostic scanner to retrieve the trouble codes, inspect the wiring and connectors associated with the pressure transducer, and perform a visual inspection of the ABS system components.
4. Can I still drive my vehicle with OBDII code C1440 present?
It is not recommended to drive the vehicle with code C1440 present, as it can affect the proper functioning of the brake system and compromise your safety on the road.
5. How can I repair OBDII code C1440?
To repair code C1440, you may need to replace the faulty pressure transducer, repair any damaged wiring or connectors, or reprogram the ABS control module as necessary.
6. Is it possible to reset OBDII code C1440 without addressing the underlying issue?
Resetting the code without addressing the underlying issue will only temporarily clear the error code. The issue will likely reoccur until the root cause is properly diagnosed and repaired.
7. Are there any DIY tips for fixing OBDII code C1440?
While some aspects of diagnosing and repairing code C1440 may be tackled by DIY enthusiasts, it's recommended to consult a professional mechanic for accurate diagnosis and repair to ensure the safety and reliability of the braking system.
8. Can extreme weather conditions trigger OBDII code C1440?
Extreme weather conditions can potentially exacerbate existing issues related to code C1440, such as causing electrical connections to fail or pressure transducer components to malfunction due to temperature fluctuations.
9. How long does it typically take to repair OBDII code C1440?
The repair time for code C1440 can vary depending on the exact cause of the issue and the extent of repairs needed. It's advisable to consult with a mechanic for a more accurate estimate based on your specific situation.
10. Is OBDII code C1440 a serious issue that requires immediate attention?
Code C1440 should be addressed promptly to ensure the proper functioning of the brake system and ABS. Ignoring this code can lead to safety concerns and potential brake failure, so it's important to address it as soon as possible.
Discuss the causes and fixes for C1440 OBDII Code
Code C1440 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
