C1440 Scion Code - Steering Angle Sensor Unusual Bank Angle Detected
Quick Answer
If the Skid Control ECU (Brake Actuator Assembly) determines that the vehicle is being driven at a steep bank angle, the Skid Control ECU (Brake Actuator Assembly) stores Diagnostic Trouble Code (DTC) C1440 while VSC operation is temporarily disabled. Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1440 Scion indicates Steering Angle Sensor Unusual Bank Angle Detected.
- Common causes
- Common causes include Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly), Yaw Rate and Acceleration Sensor harness is open or shorted, Yaw Rate and Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1440 Scion Description
What are the Possible Causes of the DTC C1440 Scion?
- Faulty Yaw Rate and Acceleration Sensor (Airbag Sensor Assembly)
- Yaw Rate and Acceleration Sensor harness is open or shorted
- Yaw Rate and Acceleration Sensor circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1440 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1440 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1440 Scion code?
Need more information on how to fix the C1440 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1440 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1440 Scion Code
1. What are the common symptoms of OBDII code C1440 in a Scion related to the Steering Angle Sensor Unusual Bank Angle Detected?
- The common symptoms include the traction control light coming on, the steering feeling heavy or unresponsive, and potential stability control issues.
2. What could cause the Steering Angle Sensor Unusual Bank Angle Detected code C1440 in a Scion?
- Possible causes include a malfunctioning steering angle sensor, damaged wiring or connectors related to the sensor, or a fault in the vehicle's stability control system.
3. How serious is the OBDII code C1440 indicating Steering Angle Sensor Unusual Bank Angle Detected in a Scion?
- This code should be taken seriously as it can affect the vehicle's stability control system, potentially compromising safety while driving.
4. Can I continue driving my Scion with the C1440 code related to the Steering Angle Sensor Unusual Bank Angle Detected?
- It is not recommended to drive the vehicle with this code present, as it can impact the steering responsiveness and stability control of the vehicle.
5. How can I diagnose and repair the Steering Angle Sensor Unusual Bank Angle Detected code C1440 in my Scion?
- Diagnosis involves checking the steering angle sensor, its wiring, and the stability control system for any faults or damage. Repair may involve sensor replacement, fixing wiring issues, or recalibrating the system.
6. Is it possible to reset the C1440 code related to the Steering Angle Sensor Unusual Bank Angle Detected in a Scion?
- While you can clear the code temporarily, it is important to address the underlying issue causing the code to prevent it from reoccurring.
7. Are there any DIY tips for troubleshooting the Steering Angle Sensor Unusual Bank Angle Detected code C1440 in a Scion?
- DIY troubleshooting tips may include checking the sensor connections, inspecting for any visible damage, and ensuring proper alignment of the steering wheel.
8. Will fixing the Steering Angle Sensor Unusual Bank Angle Detected code C1440 in my Scion require professional intervention?
- Depending on your experience and tools available, resolving this code may require professional diagnosis and repair to ensure the system is properly calibrated and functioning correctly.
9. How much does it typically cost to repair the OBDII code C1440 related to the Steering Angle Sensor Unusual Bank Angle Detected in a Scion?
- Repair costs can vary based on the extent of the issue, parts needed, and labor rates, but it is advisable to budget for sensor replacement or wiring repairs.
10. Can the Steering Angle Sensor Unusual Bank Angle Detected code C1440 in a Scion be a recurring issue?
- If the underlying cause of the code is not properly addressed, it can recur, potentially leading to persistent stability control and steering problems.
Discuss the causes and fixes for C1440 Scion OBDII Code
Code C1440 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
