C2133 Code - No Signal From Transmitter ID 3 In 2nd Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2133 indicates No Signal From Transmitter ID 3 In 2nd Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2133 Description
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2133?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning Antenna and Receiver
- Tire Pressure Warning Antenna and Receiver harness is open or shorted
- Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
- Faulty Tire Pressure Warning ECU
How to Fix the DTC C2133?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2133 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2133 code?
Need more information on how to fix the C2133 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2133 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C2133 Lexus — No Signal From Transmitter ID 3 In 2nd Mode
- C2133 Scion — No Signal From Transmitter ID 3 In 2nd Mode
- C2133 Toyota — No Signal From Transmitter ID 3 In 2nd Mode
Frequently Asked Questions about C2133 Code
1. What are common symptoms of OBDII code C2133 "No Signal From Transmitter ID 3 In 2nd Mode"?
The common symptoms include a malfunctioning tire pressure monitoring system (TPMS) in the vehicle, leading to inaccurate or unavailable tire pressure readings.
2. What can cause the OBDII code C2133 to appear?
The code C2133 typically appears when the TPMS receiver module in the vehicle fails to receive a signal from the transmitter ID 3 in the second mode, usually due to a faulty TPMS sensor or receiver.
3. How can I diagnose the cause of OBDII code C2133?
Diagnosing the cause of C2133 involves checking the TPMS sensor ID 3, verifying the signal transmission from the sensor, and inspecting the TPMS receiver module for any issues.
4. Can low tire pressure trigger the OBDII code C2133?
Yes, low tire pressure or a malfunctioning TPMS sensor can trigger the code C2133 as the system may not be able to receive the signal from the specific transmitter ID 3.
5. What are some repair tips for fixing OBDII code C2133?
Repair tips include checking and replacing the faulty TPMS sensor ID 3, ensuring proper tire pressure in all tires, resetting the TPMS system, and reprogramming the TPMS sensors if necessary.
6. Is it safe to continue driving with OBDII code C2133 present?
It is recommended to address the issue causing code C2133 promptly as driving with a malfunctioning TPMS system can compromise tire safety and performance.
7. Can weather conditions affect the appearance of OBDII code C2133?
Extreme weather conditions such as very low temperatures affecting the TPMS sensors or radio frequency interference can potentially trigger the code C2133.
8. How much does it cost to repair OBDII code C2133?
The repair cost for OBDII code C2133 can vary depending on the underlying cause, such as sensor replacement, system reset, or module reprogramming. It's advisable to consult a professional for an accurate estimate.
9. Can I reset OBDII code C2133 at home?
Resetting the OBDII code C2133 can be done at home using an OBDII scanner to clear the code after addressing the root cause of the TPMS signal issue.
10. Will OBDII code C2133 cause my vehicle to fail an emissions test?
Code C2133 is related to the TPMS system and not emissions, so it typically will not cause your vehicle to fail an emissions test. However, it's essential to address the issue for overall vehicle safety and performance.
Discuss the causes and fixes for C2133 OBDII Code
Code C2133 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
