AutoCodes – Scion – C2133 Scion

C2133 Scion Code - No Signal From Transmitter ID 3 In 2nd Mode

Quick Answer

The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C2133 Scion indicates No Signal From Transmitter ID 3 In 2nd Mode.
Common causes
Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 903
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C2133 Scion Description

The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. The measured values are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the Tire Pressure Warning ECU. The ECU compares the measured tire pressure values with the tire pressure threshold. When the measured tire pressure value is less than this threshold, the warning light in the combination meter turns on.
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
OBDII Code C2133 Scion - No Signal From Transmitter ID 3 In 2nd Mode - AutoCodes.com
C2133 Scion Code - No Signal From Transmitter ID 3 In 2nd Mode

What are the Possible Causes of the DTC C2133 Scion?

  • Faulty Tire Pressure Warning Valve and Transmitter
  • Faulty Tire Pressure Warning Antenna and Receiver
  • Tire Pressure Warning Antenna and Receiver harness is open or shorted
  • Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
  • Faulty Tire Pressure Warning ECU

How to Fix the DTC C2133 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C2133 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C2133 Scion code?

Need more information on how to fix the C2133 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C2133 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C2133 Scion Code

1. What are the common symptoms of OBDII code C2133 in a Scion?

- Common symptoms include the tire pressure monitoring system (TPMS) warning light staying on, inaccurate tire pressure readings, and loss of communication with the TPMS sensors.

2. What can cause the OBDII code C2133 in a Scion?

- The code C2133 is typically triggered by a malfunction in the transmitter ID 3 in 2nd mode, which can be caused by a faulty TPMS sensor, low sensor battery, TPMS sensor placement issues, or TPMS module communication issues.

3. How can I diagnose the cause of the OBDII code C2133 in my Scion?

- To diagnose the issue, you can use a TPMS diagnostic tool to check the signal strength and battery voltage of the TPMS sensor in transmitter ID 3. You can also visually inspect the sensor for physical damage or improper installation.

4. Can I still drive my Scion with the OBDII code C2133 present?

- It is generally safe to drive your Scion with the C2133 code, but you may experience inaccurate tire pressure readings or a non-functioning TPMS system, which can affect your ability to monitor tire pressure levels effectively.

5. How can I repair the OBDII code C2133 in my Scion?

- Repairing the C2133 code may involve replacing the faulty TPMS sensor in transmitter ID 3, ensuring proper sensor placement, replacing sensor batteries if needed, or resetting the TPMS system using a diagnostic tool.

6. Can weather conditions affect the triggering of the OBDII code C2133 in a Scion?

- Extreme weather conditions, such as temperature fluctuations, can potentially impact the TPMS sensor's performance and trigger the C2133 code. It's essential to consider environmental factors when diagnosing TPMS issues.

7. Are there any DIY tips for troubleshooting the OBDII code C2133 in my Scion?

- You can try checking and adjusting the tire pressures, ensuring proper TPMS sensor installation, and conducting a manual reset of the TPMS system to see if the code clears before seeking professional help.

8. How much does it typically cost to repair the OBDII code C2133 in a Scion?

- The cost of repairing the C2133 code can vary depending on the root cause of the issue. Replacing a TPMS sensor or addressing communication problems can range from $50 to $200, excluding labor costs.

9. Can resetting the TPMS system resolve the OBDII code C2133 in a Scion?

- Resetting the TPMS system using a diagnostic tool can sometimes clear the C2133 code if it was triggered by a temporary communication glitch or sensor misalignment. However, if the issue persists, further diagnosis may be necessary.

10. How often should I check my TPMS sensors to prevent the OBDII code C2133 from occurring?

- It's recommended to check your TPMS sensors regularly, at least once a month, to ensure they are functioning correctly and to prevent issues like the C2133 code from occurring. Regular maintenance can help you catch potential problems early.

Discuss the causes and fixes for C2133 Scion OBDII Code

Code C2133 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play