C2133 Toyota Code - No Signal From Transmitter ID 3 In 2nd Mode
Quick Answer
The Tire Pressure Warning Valve and Transmitter that are installed in the tire and wheel assemblies measure the tire pressure of the tires. Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C2133 Toyota indicates No Signal From Transmitter ID 3 In 2nd Mode.
- Common causes
- Common causes include Faulty Tire Pressure Warning Valve and Transmitter, Faulty Tire Pressure Warning Antenna and Receiver, Tire Pressure Warning Antenna and Receiver harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C2133 Toyota Description
The tire pressure warning valve and transmitters constantly send radio waves to the tire pressure warning antenna and receiver.
Under the conditions below, the tire pressure warning antenna and receiver are unable to receive the signals from the tire pressure warning valve and transmitters, and a Diagnostic Trouble Code (DTC) is stored.
- Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
- Devices using similar radio frequencies are used in the vehicle.
- The ID of the tire pressure warning valve and transmitter is mistyped during registration.
- A tire/wheel/transmitter from a different vehicle is installed.
What are the Possible Causes of the DTC C2133 Toyota?
- Faulty Tire Pressure Warning Valve and Transmitter
- Faulty Tire Pressure Warning Antenna and Receiver
- Tire Pressure Warning Antenna and Receiver harness is open or shorted
- Tire Pressure Warning Antenna and Receiver circuit poor electrical connection
- Faulty Tire Pressure Warning ECU
How to Fix the DTC C2133 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C2133 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C2133 Toyota code?
Need more information on how to fix the C2133 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C2133 Toyota code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C2133 Toyota Code
1. What are the common symptoms of OBDII code C2133 in a Toyota?
Common symptoms include the TPMS warning light illuminating on the dashboard and a message indicating "No Signal From Transmitter ID 3 In 2nd Mode."
2. What could cause the OBDII code C2133 in a Toyota?
The code C2133 typically indicates a communication issue with the Tire Pressure Monitoring System (TPMS) sensor for Transmitter ID 3 in 2nd mode, which could be due to a faulty sensor, wiring issue, or TPMS module problem.
3. How can I diagnose the cause of OBDII code C2133 in my Toyota?
Diagnosing the issue involves checking the TPMS sensor for Transmitter ID 3 in 2nd mode, inspecting the wiring for any damage, and using a TPMS tool to communicate with the sensor and module for troubleshooting.
4. Can I still drive my Toyota with OBDII code C2133 present?
While the vehicle can still be driven with the code C2133, it is important to address the TPMS issue promptly to ensure the system functions properly for monitoring tire pressure.
5. Is it possible to reset or clear OBDII code C2133 in a Toyota?
Resetting the code can be done using an OBDII scanner or by addressing the underlying TPMS issue causing the fault code. However, it is recommended to diagnose and repair the problem first.
6. What are some DIY repair tips for OBDII code C2133 in a Toyota?
DIY repair tips include checking the TPMS sensor's battery level, ensuring proper sensor installation, inspecting wiring connections, and resetting the system according to the manufacturer's recommendations.
7. Can a low tire pressure trigger OBDII code C2133 in a Toyota?
Yes, a low tire pressure condition can potentially trigger the code C2133 as the TPMS sensor may not be able to communicate the correct data to the vehicle's system.
8. How much does it cost to repair OBDII code C2133 in a Toyota?
The cost of repairing OBDII code C2133 can vary depending on the underlying issue. Costs may include sensor replacement, wiring repairs, or module troubleshooting, so it's advisable to get a professional diagnosis for an accurate estimate.
9. Are there any recalls related to OBDII code C2133 in Toyota vehicles?
Recalls related to OBDII code C2133 can vary by model and year. It's recommended to check with Toyota's official website or contact a local dealership to inquire about any relevant recalls for the specific vehicle in question.
10. Can extreme weather conditions affect OBDII code C2133 in a Toyota?
Extreme weather conditions such as temperature fluctuations or severe cold can impact TPMS sensor performance, potentially leading to issues like OBDII code C2133. It's important to monitor tire pressure regularly, especially in extreme weather, to prevent sensor malfunctions.
Discuss the causes and fixes for C2133 Toyota OBDII Code
Code C2133 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
