C1317 Code - Sensor 2 Wrong Type Installed
Quick Answer
The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1317 indicates Sensor 2 Wrong Type Installed.
- Common causes
- Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1317 Description
What are the Possible Causes of the DTC C1317?
- Faulty TPMS Sensor 2
- Faulty TPM Receiver Module
How to Fix the DTC C1317?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1317 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1317 code?
Need more information on how to fix the C1317 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1317 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1317 Hyundai — Sensor 2 Wrong Type Installed
- C1317 KIA — Sensor 2 Wrong Type Installed
Frequently Asked Questions about C1317 Code
1. What does the OBDII code C1317 mean?
C1317 indicates that the vehicle has detected an incorrect type of sensor 2 installed, typically related to a wheel speed or ABS sensor.
2. What are the common symptoms of code C1317?
Common symptoms include ABS or traction control warning lights, erratic braking behavior, or loss of ABS/traction system functionality.
3. What causes the C1317 code to be triggered?
This code is usually triggered by installing the wrong type of sensor, a mismatch in sensor compatibility, or a faulty sensor.
4. Can a damaged wiring harness cause the C1317 code?
Yes, damaged or corroded wiring to sensor 2 can lead to communication errors and trigger this code.
5. How do I fix the C1317 code?
Replace the incorrect sensor with the proper one specified for your vehicle and inspect the wiring for damage or corrosion.
6. How do I know if I installed the wrong sensor type?
Check the part number and specifications of the sensor against your vehicle's service manual or consult a parts professional to confirm compatibility.
7. Can I drive with the C1317 code active?
While the vehicle may remain drivable, the ABS or traction control systems may not function properly, increasing the risk of skidding during braking.
8. How do I diagnose the C1317 code?
Use a scan tool to confirm the error, visually inspect the sensor and wiring, and verify the sensor type matches the vehicle’s requirements.
9. Could a software issue cause the C1317 code?
While uncommon, outdated or incorrect ABS module programming could potentially cause this code, though it’s more likely related to hardware.
10. How much does it cost to repair the C1317 code?
The repair cost depends on whether only the sensor needs replacement (typically $50–$150) or if additional wiring or module issues need addressing.
Discuss the causes and fixes for C1317 OBDII Code
Code C1317 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
