AutoCodes – KIA – C1317 KIA

C1317 KIA Code - Sensor 2 Wrong Type Installed

Quick Answer

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1317 KIA indicates Sensor 2 Wrong Type Installed.
Common causes: Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,908

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1317 KIA Description

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. The TPM Receiver Module sets the OBDII code when the TPMS Sensor is not to factory specifications. This DTC indicates that the sensor has either failed to learn OR has successfully learned and the receiver did not receive messages from the learned sensor for 12 minutes.

OBDII Code C1317 KIA - Sensor 2 Wrong Type Installed - AutoCodes.com — C1317 KIA Code - Sensor 2 Wrong Type Installed

What does this mean?

What are the Possible Causes of the DTC C1317 KIA?

Faulty TPMS Sensor 2
Faulty TPM Receiver Module

How to Fix the DTC C1317 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1317 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1317 KIA code?

Need more information on how to fix the C1317 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1317 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1317 KIA Code

1. What does OBDII code C1317 for KIA mean?

The code C1317 indicates that there is a Sensor 2 Wrong Type Installed error in the vehicle's system.

2. What are the common symptoms of OBDII code C1317 in a KIA?

Common symptoms of code C1317 may include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.

3. What could cause the Sensor 2 Wrong Type Installed error in a KIA?

The error code C1317 typically occurs when the wrong type of sensor is installed in the vehicle's system, such as using an incompatible oxygen sensor.

4. How can I diagnose the OBDII code C1317 in my KIA?

Diagnosing code C1317 involves using an OBDII scanner to retrieve the specific error code, followed by inspecting the oxygen sensor to ensure it is the correct type for your vehicle.

5. What should I do if I get the C1317 error code in my KIA?

If you receive the C1317 error code, it is recommended to have a professional mechanic inspect the oxygen sensor and replace it with the correct type if needed.

6. Can I drive my KIA with the Sensor 2 Wrong Type Installed error?

It is not advisable to drive your KIA with the C1317 error code present, as it can lead to potential engine issues and decreased performance.

7. How much does it cost to repair the Sensor 2 Wrong Type Installed error in a KIA?

The cost of repairing the C1317 error code in a KIA can vary depending on the specific issue, but it typically involves replacing the incorrect sensor with the right type, which may cost a few hundred dollars.

8. Will resetting the error code make it go away permanently?

Resetting the error code may temporarily clear the check engine light, but if the underlying issue of the wrong sensor type is not addressed, the code is likely to reappear.

9. Can I replace the oxygen sensor myself to fix the C1317 error in my KIA?

While replacing the oxygen sensor is possible for some DIY enthusiasts, it is recommended to have a professional mechanic perform the replacement to ensure the correct sensor type is installed and properly calibrated.

10. Is the Sensor 2 Wrong Type Installed error in a KIA a common issue?

The C1317 error code related to Sensor 2 Wrong Type Installed is not as common as some other OBDII codes, but it can still occur due to sensor replacement or installation errors.