AutoCodes – Hyundai – C1317 Hyundai

C1317 Hyundai Code - Sensor 2 Wrong Type Installed

Quick Answer

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1317 Hyundai indicates Sensor 2 Wrong Type Installed.
Common causes: Common causes include Faulty TPMS Sensor 2, Faulty TPM Receiver Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,093

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1317 Hyundai Description

The Tire Pressure Monitor (TPM) Receiver Module monitors the TPMS Sensor. The TPM Receiver Module sets the OBDII code when the TPMS Sensor is not to factory specifications. This DTC indicates that the sensor has either failed to learn OR has successfully learned and the receiver did not receive messages from the learned sensor for 12 minutes.

OBDII Code C1317 Hyundai - Sensor 2 Wrong Type Installed - AutoCodes.com — C1317 Hyundai Code - Sensor 2 Wrong Type Installed

What does this mean?

What are the Possible Causes of the DTC C1317 Hyundai?

Faulty TPMS Sensor 2
Faulty TPM Receiver Module

How to Fix the DTC C1317 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1317 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1317 Hyundai code?

Need more information on how to fix the C1317 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1317 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1317 Hyundai Code

1. What are the common symptoms of OBDII code C1317 in a Hyundai related to Sensor 2 Wrong Type Installed?

- Common symptoms include poor engine performance, reduced fuel efficiency, and illumination of the Check Engine Light.

2. What does the OBDII code C1317 Hyundai indicate about Sensor 2 Wrong Type Installed?

- This code suggests that the wrong type of sensor has been installed in the secondary position, affecting the vehicle's emissions control system.

3. What are the possible causes of OBDII code C1317 in a Hyundai?

- Possible causes include a faulty oxygen sensor, incorrect sensor installation, damaged wiring, or issues with the engine control module.

4. How can I diagnose the OBDII code C1317 in my Hyundai?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor connections, and checking for any visible damage to the sensor or wiring.

5. Can I drive my Hyundai with the OBDII code C1317 present?

- It is not recommended to drive with the C1317 code active, as it can lead to poor engine performance and potential damage to the catalytic converter.

6. How can I repair OBDII code C1317 related to Sensor 2 Wrong Type Installed in my Hyundai?

- Repair typically involves correcting the sensor installation, replacing the incorrect sensor with the appropriate type, and ensuring proper wiring connections.

7. Is it possible to reset the OBDII code C1317 in a Hyundai without addressing the underlying issue?

- While you can clear the code with an OBDII scanner, it is crucial to address the root cause to prevent the issue from reoccurring.

8. Can a DIY enthusiast fix the OBDII code C1317 in a Hyundai?

- Depending on the individual's skill level, fixing the C1317 code may be possible by following repair guides and ensuring the correct sensor is installed properly.

9. How much does it cost to repair OBDII code C1317 related to Sensor 2 Wrong Type Installed in a Hyundai?

- The cost of repair can vary depending on the root cause, but it typically involves the price of a new sensor and potential labor fees if professional help is required.

10. Are there any preventative measures to avoid OBDII code C1317 in a Hyundai in the future?

- To prevent the C1317 code, ensure that the correct sensor type is used during replacements, follow manufacturer guidelines for sensor installation, and conduct regular vehicle maintenance checks.