C1241 Code - Low Power Supply Voltage Malfunction
Quick Answer
If a malfunction is detected in the power supply circuit, the Skid Control ECU (Brake Actuator Assembly) stores this Diagnostic Trouble Code (DTC), and the fail-safe function prohibits ABS operation. Common causes include Low Battery Charge, Faulty Battery, Faulty Charging System. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1241 indicates Low Power Supply Voltage Malfunction.
- Common causes
- Common causes include Low Battery Charge, Faulty Battery, Faulty Charging System.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1241 Description
This DTC is stored when the voltage deviates from the DTC detection condition due to a malfunction in the power supply or charging circuit such as the battery or generator circuit, etc.
The DTC is canceled when the voltage returns to normal.
What are the Possible Causes of the DTC C1241?
- Low Battery Charge
- Faulty Battery
- Faulty Charging System
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1241?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1241 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1241 code?
Need more information on how to fix the C1241 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1241 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1241 Buick — Variable Effort Steering Circuit Malfunction
- C1241 Cadillac — Variable Effort Steering Circuit Malfunction
- C1241 Chevrolet — Variable Effort Steering Circuit Malfunction
- C1241 GMC — Variable Effort Steering Circuit Malfunction
- C1241 Lexus — Low Power Supply Voltage Malfunction
- C1241 Pontiac — Variable Effort Steering Circuit Malfunction
- C1241 Scion — Low Power Supply Voltage Malfunction
- C1241 Toyota — Low Power Supply Voltage Malfunction
Frequently Asked Questions about C1241 Code
1. What are the common symptoms of OBDII code C1241 (Low Power Supply Voltage Malfunction)?
- Common symptoms include loss of power or acceleration, reduced engine performance, and possible illumination of the Check Engine Light.
2. What are the possible causes of OBDII code C1241?
- The code C1241 can be triggered by issues such as a faulty power supply relay, damaged wiring or connectors, a defective powertrain control module (PCM), or a weak battery.
3. How can I diagnose the cause of OBDII code C1241?
- A thorough diagnostic process involves checking the power supply relay, inspecting the wiring and connectors for damage, testing the battery voltage, and scanning the PCM for any related faults.
4. Can a weak battery cause OBDII code C1241 to appear?
- Yes, a weak or failing battery can lead to voltage fluctuations and trigger code C1241. It is recommended to test the battery's voltage and condition as part of the diagnostic process.
5. Is it safe to continue driving with OBDII code C1241 present?
- It is not recommended to drive with code C1241 present, as it can affect the vehicle's performance and potentially lead to further damage if left unaddressed.
6. How can I repair OBDII code C1241?
- Repairing code C1241 involves identifying and fixing the underlying cause, which may include replacing a faulty power supply relay, repairing damaged wiring, addressing PCM issues, or replacing the battery if necessary.
7. Can I reset OBDII code C1241 with a simple scan tool?
- Resetting code C1241 with a scan tool may temporarily clear the code, but it is crucial to address the root cause of the issue to prevent the code from reappearing.
8. What are some preventive maintenance tips to avoid OBDII code C1241?
- Regularly checking the battery's health, ensuring proper electrical system maintenance, and addressing any warning signs promptly can help prevent issues that may trigger code C1241.
9. Will OBDII code C1241 affect my vehicle's fuel efficiency?
- Yes, code C1241 can impact fuel efficiency by causing engine performance issues that may result in increased fuel consumption. Resolving the underlying problem can help restore optimal fuel efficiency.
10. How long does it typically take to repair OBDII code C1241?
- The repair time for code C1241 can vary based on the specific cause and complexity of the issue. It is recommended to consult a professional technician for an accurate assessment and repair timeline.
Discuss the causes and fixes for C1241 OBDII Code
-
i had this code C1241, and with others codes C1345 and P0A80, and i checked the 12V battery and the result is " need to change" but not changed, and i checked the hybrid battery's fan and cleaned it also, till now no codes appear from that checked, my car is Camry hybrid 2009.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
