C1241 Scion Code - Low Power Supply Voltage Malfunction
Quick Answer
If a malfunction is detected in the power supply circuit, the Skid Control ECU (Brake Actuator Assembly) stores this Diagnostic Trouble Code (DTC), and the fail-safe function prohibits ABS operation. Common causes include Low Battery Charge, Faulty Battery, Faulty Charging System. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1241 Scion indicates Low Power Supply Voltage Malfunction.
- Common causes
- Common causes include Low Battery Charge, Faulty Battery, Faulty Charging System.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1241 Scion Description
This DTC is stored when the voltage deviates from the DTC detection condition due to a malfunction in the power supply or charging circuit such as the battery or generator circuit, etc.
The DTC is canceled when the voltage returns to normal.
What are the Possible Causes of the DTC C1241 Scion?
- Low Battery Charge
- Faulty Battery
- Faulty Charging System
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1241 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1241 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1241 Scion code?
Need more information on how to fix the C1241 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1241 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1241 Scion Code
1. What are the common symptoms of OBDII code C1241 in a Scion indicating a Low Power Supply Voltage Malfunction?
- Common symptoms include loss of power steering assistance, illuminated warning lights on the dashboard, and difficulty steering.
2. What are the possible causes of the C1241 code in a Scion related to a Low Power Supply Voltage Malfunction?
- Possible causes include a faulty power steering control module, damaged wiring or connectors, low battery voltage, or a malfunctioning power steering motor.
3. How can I diagnose the C1241 code in my Scion to identify the source of the Low Power Supply Voltage Malfunction?
- Diagnose the code by performing a thorough inspection of the power steering system, checking for loose connections, testing the battery voltage, and using a diagnostic scan tool to retrieve specific fault codes.
4. Can a DIY enthusiast repair the C1241 code indicating a Low Power Supply Voltage Malfunction in a Scion?
- DIY repairs may be possible depending on the exact cause of the issue. Simple tasks like checking and tightening connections or replacing a damaged wire may be within reach, but complex repairs involving the control module or motor may require professional assistance.
5. How important is it to address the OBDII code C1241 in a Scion related to a Low Power Supply Voltage Malfunction?
- It is crucial to address the C1241 code promptly to ensure the power steering system operates correctly and safely. Ignoring the issue can lead to difficulty steering the vehicle, potentially compromising safety.
6. Is it safe to drive my Scion with the C1241 code showing a Low Power Supply Voltage Malfunction?
- It is not recommended to drive the vehicle with the C1241 code present as it may result in unpredictable power steering behavior, making the vehicle unsafe to operate.
7. How can I reset the OBDII code C1241 in my Scion after addressing the Low Power Supply Voltage Malfunction issue?
- The code can typically be reset using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, it is crucial to ensure the underlying problem has been fixed before resetting the code.
8. What are the typical repair costs associated with fixing the C1241 code in a Scion due to a Low Power Supply Voltage Malfunction?
- Repair costs can vary depending on the root cause of the issue. Simple fixes like replacing a damaged wire may be relatively inexpensive, while more complex repairs involving the control module or motor can be costly.
9. Can extreme weather conditions impact the occurrence of the OBDII code C1241 in a Scion related to a Low Power Supply Voltage Malfunction?
- Extreme temperatures can potentially affect the power steering system and contribute to the Low Power Supply Voltage Malfunction. It is essential to maintain the vehicle properly to minimize the risk of issues occurring.
10. How can regular maintenance help prevent the C1241 code from appearing in a Scion due to a Low Power Supply Voltage Malfunction?
- Regular maintenance, including checking the power steering system, keeping the battery in good condition, and inspecting wiring for damage, can help prevent issues that may trigger the C1241 code.
Discuss the causes and fixes for C1241 Scion OBDII Code
-
Every now and then I loose the petal on my brakes and it comes right back.it only happens once in awhile and I'm getting a code c1241 anyone familiar with this? It's a 2006 scion tc..thanks
-
The C1241 will set if the ABS Control Unit loses power. Start by checking the alternator charge and battery. Make sure the battery terminals are clean and tight.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
