AutoCodes – Generic – B1F06

B1F06 Code - Mirror Control Sensor Position Circuit

Quick Answer

The mirror position sensor is used in conjunction with the memory system. Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1F06 indicates Mirror Control Sensor Position Circuit.
Common causes: Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,327

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 05, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1F06 Description

The mirror position sensor is used in conjunction with the memory system. Anytime the mirror changes position, the sensor changes its value. That value is stored in the door module. When a command from the memory set switch is received, the module will position the mirror to the exact position chosen by the particular driver. The Door Module will set the OBDII code when Door Module senses a short to battery, open or short to ground on either the 5-volt supply, the mirror horizontal signal or the mirror vertical position signal circuit.

OBDII Code B1F06 - Mirror Control Sensor Position Circuit - AutoCodes.com — B1F06 Code - Mirror Control Sensor Position Circuit

What does this mean?

What are the Possible Causes of the DTC B1F06?

Faulty Exterior Mirror
Exterior Mirror harness is open or shorted
Exterior Mirror circuit poor electrical connection
Faulty Door Module

How to Fix the DTC B1F06?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1F06-12 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO BATTERY
B1F06-14 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO GROUND OR OPEN

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1F06 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1F06 code?

Need more information on how to fix the B1F06 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1F06 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1F06 Chrysler — Mirror Control Sensor Position Circuit
B1F06 Dodge — Mirror Control Sensor Position Circuit
B1F06 Jeep — Mirror Control Sensor Position Circuit
B1F06 RAM — Mirror Control Sensor Position Circuit

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1F06 Code

1. What are the common symptoms of OBDII code B1F06 (Mirror Control Sensor Position Circuit)?

- Common symptoms include malfunctioning power mirrors, erratic mirror movements, or complete loss of mirror control.

2. What causes OBDII code B1F06 to trigger?

- This code is triggered when the mirror control sensor position circuit detects an electrical fault, such as a short circuit or open circuit.

3. How can I diagnose the Mirror Control Sensor Position Circuit issue?

- Diagnostic steps include checking the wiring harness for damage, inspecting the mirror control switch, and testing the mirror control sensor for proper function.

4. Can a faulty mirror control sensor be repaired, or does it need to be replaced?

- In most cases, a faulty mirror control sensor will need to be replaced rather than repaired to restore proper mirror functionality.

5. Are there any common mistakes to avoid when troubleshooting OBDII code B1F06?

- Avoid overlooking loose connections or bad grounds, as these issues can often be the root cause of the Mirror Control Sensor Position Circuit problem.

6. Is it safe to continue driving with OBDII code B1F06 active?

- It is generally safe to drive with this code, but it is recommended to address the issue promptly to avoid potential safety hazards or inconvenience.

7. Can resetting the OBDII system clear the B1F06 code temporarily?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.

8. Are there any DIY repair tips for fixing OBDII code B1F06?

- DIY repair tips include checking and cleaning the mirror control sensor connectors, ensuring proper voltage supply, and inspecting the mirror control module.

9. How much does it typically cost to repair OBDII code B1F06 at a professional auto repair shop?

- The cost of repairing this code can vary depending on the specific cause of the issue, but it may range from $100 to $300 at a professional auto repair shop.

10. Can OBDII code B1F06 affect other vehicle systems or components?

- While this code specifically relates to the mirror control sensor position circuit, electrical faults in this system may sometimes cause issues with other electronic components in the vehicle.