AutoCodes – Jeep – B1F06 Jeep

B1F06 Jeep Code - Mirror Control Sensor Position Circuit

Quick Answer

The mirror position sensor is used in conjunction with the memory system. Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1F06 Jeep indicates Mirror Control Sensor Position Circuit.
Common causes: Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 979

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 05, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1F06 Jeep Description

The mirror position sensor is used in conjunction with the memory system. Anytime the mirror changes position, the sensor changes its value. That value is stored in the door module. When a command from the memory set switch is received, the module will position the mirror to the exact position chosen by the particular driver. The Door Module will set the OBDII code when Door Module senses a short to battery, open or short to ground on either the 5-volt supply, the mirror horizontal signal or the mirror vertical position signal circuit.

OBDII Code B1F06 Jeep - Mirror Control Sensor Position Circuit - AutoCodes.com — B1F06 Jeep Code - Mirror Control Sensor Position Circuit

What does this mean?

What are the Possible Causes of the DTC B1F06 Jeep?

Faulty Exterior Mirror
Exterior Mirror harness is open or shorted
Exterior Mirror circuit poor electrical connection
Faulty Door Module

How to Fix the DTC B1F06 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1F06-12 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO BATTERY
B1F06-14 MIRROR CONTROL SENSOR POSITION CIRCUIT SHORT TO GROUND OR OPEN

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1F06 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1F06 Jeep code?

Need more information on how to fix the B1F06 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1F06 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1F06 Jeep Code

What does the OBDII code B1F06 mean for my Jeep?

The OBDII code B1F06 indicates a problem with the mirror control sensor position circuit, which is related to the functionality of the side mirrors.

What symptoms might I experience if my Jeep has the B1F06 code?

Common symptoms include malfunctioning side mirror adjustments, mirrors that won't move, or mirrors that move erratically.

What are the possible causes of the B1F06 code?

Possible causes include a faulty mirror control sensor, damaged wiring or connectors in the circuit, or issues with the vehicleâ€™s body control module.

How can I diagnose the B1F06 code in my Jeep?

To diagnose the B1F06 code, use an OBD-II scanner to confirm the code, then inspect the mirror control sensor, wiring, and connectors for damage or corrosion.

Can I fix the B1F06 code myself, or should I take it to a mechanic?

If you have experience with automotive repairs, you can troubleshoot and possibly replace the mirror control sensor or repair wiring. Otherwise, it's best to consult a professional mechanic.

What should I check first if I get the B1F06 code?

Start by inspecting the mirror control sensor and its wiring for any signs of damage, corrosion, or disconnection.

Will clearing the B1F06 code fix the issue?

Clearing the code will not fix the underlying issue; the problem must be diagnosed and repaired for the code to stay cleared.

Is the B1F06 code serious, and will it affect driving safety?

While the code itself may not pose immediate safety risks, non-functional mirrors can hinder visibility, making it important to address the issue promptly.

How much does it typically cost to repair the B1F06 code?

Repair costs can vary widely depending on the specific issue, ranging from a simple wiring fix to a full sensor replacement, typically costing between $100 to $300.

Can the B1F06 code affect other functions in my Jeep?

Yes, if the mirror control circuit is malfunctioning, it may affect other electronics tied to the body control module, potentially leading to further issues.