AutoCodes – Chrysler – B1F06 Chrysler

B1F06 Chrysler Code - Mirror Control Sensor Position Circuit

Quick Answer

The mirror position sensor is used in conjunction with the memory system. Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1F06 Chrysler indicates Mirror Control Sensor Position Circuit.
Common causes
Common causes include Faulty Exterior Mirror, Exterior Mirror harness is open or shorted, Exterior Mirror circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,831
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 05, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B1F06 Chrysler Description

The mirror position sensor is used in conjunction with the memory system. Anytime the mirror changes position, the sensor changes its value. That value is stored in the door module. When a command from the memory set switch is received, the module will position the mirror to the exact position chosen by the particular driver. The Door Module will set the OBDII code when Door Module senses a short to battery, open or short to ground on either the 5-volt supply, the mirror horizontal signal or the mirror vertical position signal circuit.
OBDII Code B1F06 Chrysler - Mirror Control Sensor Position Circuit - AutoCodes.com
B1F06 Chrysler Code - Mirror Control Sensor Position Circuit

What are the Possible Causes of the DTC B1F06 Chrysler?

  • Faulty Exterior Mirror
  • Exterior Mirror harness is open or shorted
  • Exterior Mirror circuit poor electrical connection
  • Faulty Door Module

How to Fix the DTC B1F06 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1F06 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1F06 Chrysler code?

Need more information on how to fix the B1F06 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1F06 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1F06 Chrysler Code

1. What does OBDII code B1F06 mean on a Chrysler?

Code B1F06 indicates an issue with the Mirror Control Sensor Position Circuit, which monitors the position of the side mirrors for proper functionality.

2. What are the common symptoms of code B1F06?

Symptoms may include unresponsive or erratic side mirror adjustments, mirror position memory not working, or a warning light on the dashboard.

3. What causes the B1F06 code to appear?

The code is often caused by a faulty mirror position sensor, damaged wiring or connectors in the mirror circuit, or an issue with the mirror control module.

4. Can a loose wire trigger the B1F06 code?

Yes, loose, corroded, or damaged wiring in the mirror control sensor circuit can trigger this code.

5. How do you diagnose the B1F06 code?

Diagnosis involves inspecting the mirror control sensor, checking the wiring and connectors for damage, and using a scan tool to test the circuit.

6. Is it safe to drive with the B1F06 code?

Yes, it is generally safe to drive, but the mirrors may not adjust properly, which could impact visibility and safety.

7. How do you fix the B1F06 code?

Repairs may include replacing the mirror position sensor, fixing damaged wiring or connectors, or reprogramming the mirror control module.

8. How much does it cost to fix the B1F06 code?

Repair costs depend on the exact issue but typically range from $100 to $300, including parts and labor.

9. Can I clear the B1F06 code without fixing the issue?

Clearing the code without addressing the root cause will likely result in the code returning shortly afterward.

10. Do I need a professional mechanic to fix the B1F06 code?

While basic wiring checks can be done at home, resolving complex electrical or module issues is best handled by a professional.

Discuss the causes and fixes for B1F06 Chrysler OBDII Code

Code B1F06 Chrysler comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play