AutoCodes – Generic – B1B76

B1B76 Code - Right Side Satellite Acceleration Sensor 2 Internal

Quick Answer

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1B76 indicates Right Side Satellite Acceleration Sensor 2 Internal.
Common causes: Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,644

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B76 Description

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicates this status back to the ORC with periodic updates. The impact sensor performs a self test for internal circuitry at power up during the initialization process, and continuously through the ignition cycle. The monitoring repeat rate is every 100ms at startup and then every 1 second during the ignition cycle.

OBDII Code B1B76 - Right Side Satellite Acceleration Sensor 2 Internal - AutoCodes.com — B1B76 Code - Right Side Satellite Acceleration Sensor 2 Internal

What does this mean?

What are the Possible Causes of the DTC B1B76?

Faulty Right Side Impact Sensor 2
Right Side Impact Sensor 2 harness is open or shorted
Right Side Impact Sensor 2 circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B76?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B76 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B76 code?

Need more information on how to fix the B1B76 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B76 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1B76 Chrysler — Right Side Satellite Acceleration Sensor 2 Internal
B1B76 Dodge — Right Side Satellite Acceleration Sensor 2 Internal
B1B76 Jeep — Right Side Satellite Acceleration Sensor 2 Internal
B1B76 Mitsubishi — Right Side Satellite Acceleration Sensor 2 Internal
B1B76 RAM — Right Side Satellite Acceleration Sensor 2 Internal

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B76 Code

1. What are common symptoms of OBDII code B1B76 (Right Side Satellite Acceleration Sensor 2 Internal)?

- Common symptoms include the airbag warning light illuminating on the dashboard, potential airbag system malfunctions, and diagnostic trouble codes related to the right side satellite acceleration sensor.

2. What can cause OBDII code B1B76 to trigger?

- This code is typically triggered by a malfunction or internal failure within the right side satellite acceleration sensor 2. It could be due to wiring issues, sensor damage, or other related problems.

3. How serious is OBDII code B1B76?

- OBDII code B1B76 is related to the airbag system, so it should be taken seriously. If this code is present, it indicates a potential issue with the right side satellite acceleration sensor, which could impact the proper functioning of the airbag system in the event of a collision.

4. Can OBDII code B1B76 be reset or cleared without fixing the underlying issue?

- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the underlying problem. Resetting the code without fixing the sensor issue may lead to continued airbag system malfunctions.

5. How can I diagnose and repair OBDII code B1B76?

- Diagnosis typically involves inspecting the right side satellite acceleration sensor, its wiring, and related components for any visible damage or issues. Repair may involve replacing the sensor, repairing wiring, or addressing any other identified problems.

6. Is it safe to drive with OBDII code B1B76 present?

- It is not recommended to drive with OBDII code B1B76 present, as it indicates a potential issue with the right side satellite acceleration sensor, which is an important component of the airbag system. Driving with this code present could compromise the proper functioning of the airbags in case of an accident.

7. How much does it cost to fix OBDII code B1B76?

- The cost of fixing OBDII code B1B76 can vary depending on the underlying issue causing the code to trigger. Costs may include parts and labor for sensor replacement, wiring repairs, or other necessary repairs.

8. Can I fix OBDII code B1B76 myself, or do I need a professional mechanic?

- While some experienced DIYers may be able to diagnose and repair OBDII code B1B76 themselves, it is recommended to seek the expertise of a professional mechanic, especially when dealing with airbag system components to ensure proper diagnosis and repair.

9. Will OBDII code B1B76 affect vehicle performance?

- OBDII code B1B76 is related to the airbag system and should not directly affect the overall performance of the vehicle. However, it is essential to address this code promptly to ensure the proper functioning of the airbags in case of an accident.

10. How long does it typically take to repair OBDII code B1B76?

- The repair time for OBDII code B1B76 can vary based on the specific issue causing the code to trigger and the complexity of the repair. It may range from a relatively quick sensor replacement to more extensive troubleshooting and repairs.