AutoCodes – RAM – B1B76 RAM

B1B76 RAM Code - Right Side Satellite Acceleration Sensor 2 Internal

Quick Answer

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1B76 RAM indicates Right Side Satellite Acceleration Sensor 2 Internal.
Common causes: Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 622

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B76 RAM Description

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicates this status back to the ORC with periodic updates. The impact sensor performs a self test for internal circuitry at power up during the initialization process, and continuously through the ignition cycle. The monitoring repeat rate is every 100ms at startup and then every 1 second during the ignition cycle.

OBDII Code B1B76 RAM - Right Side Satellite Acceleration Sensor 2 Internal - AutoCodes.com — B1B76 RAM Code - Right Side Satellite Acceleration Sensor 2 Internal

What does this mean?

What are the Possible Causes of the DTC B1B76 RAM?

Faulty Right Side Impact Sensor 2
Right Side Impact Sensor 2 harness is open or shorted
Right Side Impact Sensor 2 circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B76 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B76 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B76 RAM code?

Need more information on how to fix the B1B76 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B76 RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B76 RAM Code

1. What are the common symptoms of OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Common symptoms include the malfunction indicator light (MIL) coming on, erratic behavior of the acceleration sensor, and potential issues with the vehicle's stability control system.

2. What are the possible causes of OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Possible causes include a faulty acceleration sensor, wiring or connector issues, sensor calibration problems, or issues with the vehicle's computer system.

3. How can I diagnose OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Diagnosis involves using a diagnostic scanner to read the trouble code, inspecting the acceleration sensor and its wiring for damage, and performing a sensor calibration if necessary.

4. Can I drive my vehicle with OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- It is not recommended to drive the vehicle with this code present, as it can affect the stability control system and compromise driving safety. It's best to have the issue diagnosed and repaired promptly.

5. How can I repair OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Repair typically involves replacing the faulty acceleration sensor, repairing any damaged wiring or connectors, and ensuring the sensor is properly calibrated to the vehicle's system.

6. Is it possible to reset OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal without repairs?

- While clearing the code with a diagnostic scanner may temporarily turn off the MIL, the underlying issue causing the code will persist until properly diagnosed and repaired.

7. How much does it cost to repair OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Repair costs can vary depending on the extent of the issue, but replacing the acceleration sensor and addressing any wiring problems can range from $200 to $500 including parts and labor.

8. Can a DIY enthusiast fix OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- While some experienced DIYers may be able to replace the acceleration sensor and check wiring connections, proper diagnosis and calibration may require specialized tools and knowledge best handled by a professional mechanic.

9. How long does it take to repair OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal?

- Repair time can vary depending on the exact issue and the mechanic's experience, but replacing the acceleration sensor and addressing related problems typically takes 1-2 hours.

10. Will OBDII code B1B76 RAM for the Right Side Satellite Acceleration Sensor 2 Internal affect my vehicle's performance?

- While the immediate impact on performance may be minimal, unresolved issues related to this code can affect the vehicle's stability control system and overall driving safety. It's important to address the problem promptly.