AutoCodes – Dodge – B1B76 Dodge

B1B76 Dodge Code - Right Side Satellite Acceleration Sensor 2 Internal

Quick Answer

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1B76 Dodge indicates Right Side Satellite Acceleration Sensor 2 Internal.
Common causes: Common causes include Faulty Right Side Impact Sensor 2, Right Side Impact Sensor 2 harness is open or shorted, Right Side Impact Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 869

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1B76 Dodge Description

The Right Side Impact Sensor is located in the C-pillar area just past the second row doors. The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicates this status back to the ORC with periodic updates. The impact sensor performs a self test for internal circuitry at power up during the initialization process, and continuously through the ignition cycle. The monitoring repeat rate is every 100ms at startup and then every 1 second during the ignition cycle.

OBDII Code B1B76 Dodge - Right Side Satellite Acceleration Sensor 2 Internal - AutoCodes.com — B1B76 Dodge Code - Right Side Satellite Acceleration Sensor 2 Internal

What does this mean?

What are the Possible Causes of the DTC B1B76 Dodge?

Faulty Right Side Impact Sensor 2
Right Side Impact Sensor 2 harness is open or shorted
Right Side Impact Sensor 2 circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B1B76 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1B76 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1B76 Dodge code?

Need more information on how to fix the B1B76 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1B76 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1B76 Dodge Code

1. What are the common symptoms of OBDII code B1B76 in a Dodge related to the Right Side Satellite Acceleration Sensor 2 Internal?

The common symptoms include the airbag warning light illuminating on the dashboard and potential loss of function of the airbag system.

2. What can cause the OBDII code B1B76 in a Dodge with the Right Side Satellite Acceleration Sensor 2 Internal?

The code B1B76 can be triggered by a malfunction or failure of the right side satellite acceleration sensor 2 internal, wiring issues, or a problem with the airbag control module.

3. Is it safe to drive with the OBDII code B1B76 in a Dodge indicating a problem with the Right Side Satellite Acceleration Sensor 2 Internal?

It is not recommended to drive the vehicle with this code present as it may affect the proper deployment of the airbags in the event of a collision.

4. How can I diagnose the OBDII code B1B76 in a Dodge related to the Right Side Satellite Acceleration Sensor 2 Internal?

Diagnosis typically involves using a scan tool to retrieve the specific fault code, inspecting the sensor and its wiring for any visible damage, and testing the sensor's functionality.

5. What are the repair options for fixing the OBDII code B1B76 in a Dodge associated with the Right Side Satellite Acceleration Sensor 2 Internal?

Repair options may include replacing the faulty sensor, repairing damaged wiring, or reprogramming the airbag control module to clear the fault code.

6. Can I reset the OBDII code B1B76 in a Dodge myself after fixing the issue with the Right Side Satellite Acceleration Sensor 2 Internal?

Once the issue with the sensor or wiring is fixed, you can clear the fault code using a scan tool or by disconnecting the vehicle's battery for a few minutes.

7. Are there any safety concerns to be aware of when dealing with the OBDII code B1B76 in a Dodge related to the Right Side Satellite Acceleration Sensor 2 Internal?

It is crucial to address this issue promptly as it may impact the proper functioning of the airbag system, potentially compromising occupant safety in the event of a collision.

8. How do I prevent the OBDII code B1B76 from recurring in my Dodge after repair?

Regularly inspecting and maintaining the airbag system, including the satellite acceleration sensors, can help prevent the recurrence of this fault code.

9. What is the typical cost of repairing the OBDII code B1B76 in a Dodge due to the Right Side Satellite Acceleration Sensor 2 Internal issue?

The cost of repair can vary depending on the extent of the problem, the need for replacement parts, and labor costs. It is advisable to consult a professional for an accurate estimate.

10. Can a DIY enthusiast with basic automotive skills fix the OBDII code B1B76 in a Dodge related to the Right Side Satellite Acceleration Sensor 2 Internal?

While some may attempt the repair themselves, dealing with airbag system components requires caution and expertise. It is recommended to seek assistance from a qualified mechanic for this type of repair.