AutoCodes – Generic – B19CD

B19CD Code - Left Power Sliding Door Close Direction Pawl Switch Performance

Quick Answer

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation. Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19CD indicates Left Power Sliding Door Close Direction Pawl Switch Performance.
Common causes: Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,633

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19CD Description

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation.

OBDII Code B19CD - Left Power Sliding Door Close Direction Pawl Switch Performance - AutoCodes.com — B19CD Code - Left Power Sliding Door Close Direction Pawl Switch Performance

What does this mean?

What are the Possible Causes of the DTC B19CD?

Power Sliding Door Module Out Of Calibration
Faulty Left Pawl Switch Sense
Left Pawl Switch Sense harness is open or shorted
Left Pawl Switch Sense circuit poor electrical connection
Faulty Left Power Sliding Door Latch
Faulty Rear Door Module

How to Fix the DTC B19CD?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19CD code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19CD code?

Need more information on how to fix the B19CD code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19CD code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B19CD Chrysler — Left Power Sliding Door Close Direction Pawl Switch Performance
B19CD Dodge — Left Power Sliding Door Close Direction Pawl Switch Performance
B19CD Jeep — Left Power Sliding Door Close Direction Pawl Switch Performance
B19CD RAM — Left Power Sliding Door Close Direction Pawl Switch Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19CD Code

1. What are the common symptoms of OBDII code B19CD?

The common symptoms of OBDII code B19CD (Left Power Sliding Door Close Direction Pawl Switch Performance) include difficulty closing the left power sliding door, intermittent door operation, or the door not closing securely.

2. What causes OBDII code B19CD to be triggered?

OBDII code B19CD is typically triggered when the left power sliding door's close direction pawl switch does not perform as expected. This can be due to issues with the switch itself, wiring problems, or a faulty door control module.

3. How can I diagnose the cause of OBDII code B19CD?

To diagnose the cause of OBDII code B19CD, you can start by checking the wiring and connections related to the left power sliding door close direction pawl switch. Inspect the switch for any visible damage or wear. Using a diagnostic scanner to read the code and accessing the door control module for further troubleshooting can also help pinpoint the issue.

4. Can OBDII code B19CD be fixed easily?

Fixing OBDII code B19CD may range from a simple switch replacement to more complex wiring repairs or module reprogramming. The difficulty of the fix depends on the root cause of the issue, so it is advisable to consult a professional for accurate diagnosis and repair.

5. Are there any temporary solutions if my left power sliding door is not closing properly due to OBDII code B19CD?

If your left power sliding door is not closing properly due to OBDII code B19CD, you can try manually closing the door and avoiding regular use until the issue is resolved. However, it is recommended to address the problem promptly to ensure safe and reliable operation of the door.

6. Is it safe to continue driving with OBDII code B19CD present?

While OBDII code B19CD itself may not directly affect the drivability of the vehicle, it is important to address the underlying issue promptly. Driving with a malfunctioning power sliding door can pose safety risks, especially if the door fails to close securely while the vehicle is in motion.

7. How much does it typically cost to repair OBDII code B19CD?

The cost of repairing OBDII code B19CD can vary depending on the cause of the issue, the extent of the repairs needed, and labor rates in your area. Simple fixes like switch replacement may cost less, while complex wiring or module repairs can be more expensive. It's best to get a few quotes from reputable mechanics to compare prices.

8. Can OBDII code B19CD affect other vehicle systems?

OBDII code B19CD is specific to the left power sliding door close direction pawl switch performance and is unlikely to directly affect other vehicle systems. However, it is essential to address the issue promptly to prevent any potential complications or safety hazards associated with the malfunctioning door.

9. How long does it typically take to repair OBDII code B19CD?

The repair time for OBDII code B19CD can vary depending on the complexity of the issue and the availability of parts. Simple fixes may be completed within an hour, while more involved repairs could take several hours or even a day. It's best to consult with a professional for a more accurate estimation based on your specific situation.

10. Can OBDII code B19CD reoccur after it has been repaired?

If OBDII code B19CD has been properly diagnosed and repaired, it should not reoccur as long as the underlying issue has been effectively resolved. Regular maintenance and inspections of the power sliding door system can help prevent similar problems in the future.