AutoCodes – Jeep – B19CD Jeep

B19CD Jeep Code - Left Power Sliding Door Close Direction Pawl Switch Performance

Quick Answer

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation. Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B19CD Jeep indicates Left Power Sliding Door Close Direction Pawl Switch Performance.
Common causes: Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 597

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B19CD Jeep Description

This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation.

OBDII Code B19CD Jeep - Left Power Sliding Door Close Direction Pawl Switch Performance - AutoCodes.com — B19CD Jeep Code - Left Power Sliding Door Close Direction Pawl Switch Performance

What does this mean?

What are the Possible Causes of the DTC B19CD Jeep?

Power Sliding Door Module Out Of Calibration
Faulty Left Pawl Switch Sense
Left Pawl Switch Sense harness is open or shorted
Left Pawl Switch Sense circuit poor electrical connection
Faulty Left Power Sliding Door Latch
Faulty Rear Door Module

How to Fix the DTC B19CD Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B19CD Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B19CD Jeep code?

Need more information on how to fix the B19CD Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B19CD Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B19CD Jeep Code

1. What are the common symptoms of OBDII code B19CD in a Jeep related to the Left Power Sliding Door Close Direction Pawl Switch Performance?

- The common symptoms include the power sliding door not closing properly or failing to respond to commands.

2. What causes the OBDII code B19CD to be triggered in a Jeep's Left Power Sliding Door?

- The code is typically triggered by a malfunction or performance issue with the pawl switch that controls the close direction of the left power sliding door.

3. How can I diagnose the issue with the Left Power Sliding Door Close Direction Pawl Switch in my Jeep?

- Diagnosing the issue involves checking the wiring connections, inspecting the switch for physical damage, and using a diagnostic scanner to retrieve the specific error codes.

4. Can I still manually operate the left power sliding door if the B19CD code is triggered in my Jeep?

- In some cases, you may still be able to manually operate the sliding door even if the code is triggered, but it is recommended to address the underlying issue promptly.

5. Is it safe to drive my Jeep with the OBDII code B19CD related to the Left Power Sliding Door issue?

- It is generally safe to drive the vehicle with this code, but the power sliding door functionality may be impaired, causing inconvenience and potential safety concerns.

6. Are there any quick fixes or temporary solutions for the Left Power Sliding Door Close Direction Pawl Switch Performance issue?

- Quick fixes may include checking for any loose connections, ensuring the door track is clear of obstructions, and performing a reset of the power sliding door system.

7. How much does it typically cost to repair the Left Power Sliding Door Close Direction Pawl Switch issue in a Jeep?

- The cost of repair can vary depending on the extent of the issue and whether it requires a simple switch replacement or more extensive repairs. It's recommended to consult a professional for an accurate estimate.

8. Can I reset the OBDII code B19CD related to the Left Power Sliding Door myself?

- You may be able to temporarily clear the code by disconnecting the vehicle's battery for a few minutes, but it's important to address the underlying issue to prevent the code from reappearing.

9. Will the OBDII code B19CD prevent my Jeep's Left Power Sliding Door from opening?

- The code is specifically related to the close direction pawl switch performance, so it may not directly prevent the door from opening, but it can affect the proper closing and operation of the sliding door.

10. How can I prevent the recurrence of the OBDII code B19CD in my Jeep's Left Power Sliding Door system?

- Regular maintenance of the power sliding door system, including checking for any signs of wear or damage, can help prevent the recurrence of the B19CD code.