B19CD Dodge Code - Left Power Sliding Door Close Direction Pawl Switch Performance
Quick Answer
This code will set when the pawl switch has been detected before the door enters into secondary position during a closing operation. Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B19CD Dodge indicates Left Power Sliding Door Close Direction Pawl Switch Performance.
- Common causes
- Common causes include Power Sliding Door Module Out Of Calibration, Faulty Left Pawl Switch Sense, Left Pawl Switch Sense harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B19CD Dodge Description
What are the Possible Causes of the DTC B19CD Dodge?
- Power Sliding Door Module Out Of Calibration
- Faulty Left Pawl Switch Sense
- Left Pawl Switch Sense harness is open or shorted
- Left Pawl Switch Sense circuit poor electrical connection
- Faulty Left Power Sliding Door Latch
- Faulty Rear Door Module
How to Fix the DTC B19CD Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B19CD Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B19CD Dodge code?
Need more information on how to fix the B19CD Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B19CD Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B19CD Dodge Code
1. What are the common symptoms of OBDII code B19CD for the Left Power Sliding Door Close Direction Pawl Switch Performance in a Dodge?
- Common symptoms include difficulty closing the power sliding door, intermittent operation, or the door not closing fully.
2. What can cause the OBDII code B19CD to be triggered in a Dodge's left power sliding door?
- The code B19CD is typically triggered when there is a malfunction in the pawl switch that controls the closing direction of the power sliding door.
3. How can I diagnose the issue causing the OBDII code B19CD in my Dodge's left power sliding door?
- Diagnosis involves inspecting the pawl switch for any visible damage or wear, checking for loose connections, and using a diagnostic scanner to read the specific error codes.
4. Can I still use the power sliding door if the OBDII code B19CD is triggered in my Dodge?
- It is not recommended to continue using the power sliding door if the code B19CD is triggered, as it can lead to further damage and potentially unsafe operation.
5. What are some repair tips for addressing the OBDII code B19CD related to the Left Power Sliding Door Close Direction Pawl Switch Performance in a Dodge?
- Repair tips may include replacing the faulty pawl switch, ensuring proper alignment of the door mechanism, and resetting the door system after repairs are made.
6. Is it safe to drive my Dodge with the OBDII code B19CD related to the power sliding door issue?
- It is generally safe to drive the vehicle with the code B19CD, but it is important to address the underlying issue promptly to avoid potential safety hazards or further damage.
7. How much does it typically cost to repair the OBDII code B19CD in a Dodge's left power sliding door?
- The cost of repairs can vary depending on the extent of the damage and the specific parts that need to be replaced, but it may range from a few hundred to a few thousand dollars.
8. Can I reset the OBDII code B19CD in my Dodge's left power sliding door without making any repairs?
- While you can attempt to clear the code using a diagnostic scanner, it is recommended to address the underlying issue causing the code to prevent further problems with the power sliding door.
9. How common is the OBDII code B19CD related to the Left Power Sliding Door Close Direction Pawl Switch Performance in Dodge vehicles?
- The B19CD code related to the power sliding door issue is not uncommon in Dodge vehicles equipped with power sliding doors, especially in models with higher mileage or older components.
10. Are there any preventive maintenance tips to help avoid the OBDII code B19CD issue in a Dodge's power sliding door?
- Regularly lubricating the door mechanism, inspecting for any signs of wear or damage, and addressing any issues promptly can help prevent the occurrence of the B19CD code in the power sliding door.
Discuss the causes and fixes for B19CD Dodge OBDII Code
Code B19CD Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
