AutoCodes – Generic – B1353

B1353 Code - Passenger Front Airbag Resistance Too High

Quick Answer

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1353 indicates Passenger Front Airbag Resistance Too High.
Common causes: Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,976

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1353 Description

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself.
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the passenger airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.

OBDII Code B1353 - Passenger Front Airbag Resistance Too High - AutoCodes.com — B1353 Code - Passenger Front Airbag Resistance Too High

What does this mean?

What are the Possible Causes of the DTC B1353?

Faulty Passenger Front Airbag
Passenger Front Airbag harness is open or shorted
Passenger Front Airbag circuit poor electrical connection

How to Fix the DTC B1353?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1353 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1353 code?

Need more information on how to fix the B1353 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1353 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1353 Buick — Passenger Front Airbag Resistance Too High
B1353 Cadillac — Passenger Front Airbag Resistance Too High
B1353 Chevrolet — Passenger Front Airbag Resistance Too High
B1353 Ford — Ignition Key-In Circuit Open
B1353 GMC — Passenger Front Airbag Resistance Too High
B1353 Hyundai — Passenger-Side Air Bag Module First Stage Resistance High
B1353 KIA — Passenger-Side Air Bag Module First Stage Resistance High
B1353 Lincoln — Ignition Key-In Circuit Open
B1353 Mercury — Ignition Key-In Circuit Open

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1353 Code

1. What are the common symptoms of OBDII code B1353?

- The common symptoms of OBDII code B1353, "Passenger Front Airbag Resistance Too High," include the airbag warning light illuminating on the dashboard and a potential message indicating an airbag system fault.

2. What are the possible causes of OBDII code B1353?

- Possible causes of OBDII code B1353 include a faulty passenger front airbag, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

3. How serious is OBDII code B1353?

- OBDII code B1353 should be taken seriously as it indicates a potential issue with the passenger front airbag system. In the event of a collision, the airbag may not deploy correctly, compromising passenger safety.

4. How can I diagnose OBDII code B1353?

- Diagnosing OBDII code B1353 typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the airbag system components for damage or loose connections, and performing resistance tests on the passenger front airbag.

5. Can I still drive my vehicle with OBDII code B1353?

- It is not recommended to drive the vehicle with OBDII code B1353 present, as it indicates a potential safety issue with the passenger front airbag system. It is best to have the issue diagnosed and repaired as soon as possible.

6. How can I repair OBDII code B1353?

- Repairing OBDII code B1353 may involve replacing the passenger front airbag, repairing damaged wiring or connectors, or resetting the airbag control module. It is recommended to have the repair performed by a professional technician.

7. Are there any safety precautions I should take with OBDII code B1353?

- When dealing with OBDII code B1353, it is important to disconnect the vehicle's battery before working on any airbag components to prevent accidental deployment. Additionally, follow all safety protocols outlined in the vehicle's service manual.

8. Can a DIY enthusiast fix OBDII code B1353 at home?

- While some DIY enthusiasts may have the skills to diagnose and repair OBDII code B1353, working on airbag systems requires specialized knowledge and tools. It is recommended to consult a professional technician for proper diagnosis and repair.

9. How much does it cost to repair OBDII code B1353?

- The cost to repair OBDII code B1353 can vary depending on the specific issue causing the fault. Repairs may range from a few hundred to over a thousand dollars, including parts and labor. Get a detailed estimate from a trusted mechanic.

10. Will OBDII code B1353 reset itself after repairs?

- After repairs have been made to address the underlying issue causing OBDII code B1353, the fault code may not reset automatically. A diagnostic scanner may be required to clear the code and ensure that the airbag system is functioning properly.